Latest activity

I report how I resolved an Ink Leak Sensor Error 034831 on an SC-P900. 1) How I triggered the error: I flushed the printer using an...

Hi Thilo, Actually the aftermarket chips from aliexpress can be easily reset with your cartridge chip resetter despite it says one time...

Thanks for your reply. You made a good point about the electrical connections and I've just checked the contacts on both cartridges and...

Thanks for your reply. You made a good point about the electrical connections and I've just checked the contacts on both cartridges and...

Obviously not having this type of experience directly printing with PLA I can only hazard a guess what the issues may be. I do not...

I report how I resolved an Ink Leak Sensor Error 034831 on an SC-P900. 1) How I triggered the error: I flushed the printer using an...

Hi there, I'm Thilo and new in this round. It's impressive to read an learn from your experience. I'm mostly exploring the many options...

Hi everyone, Glad to be part of this community. I’ve been working in the printing and promotional products space, focusing on how...

If you have cartridges available, you could always try it, yet my understanding is that they may look the same and "may" insert, yet the...

I've never had success drying filament that is brittle and it becoming less brittle. From the research I've done there are a few other...

Sorry to hear you are having issues with brittle filament and breakages. I am sure you have probably looked into it but from what I...

".....my spouse would take exception." And mine too... guaranteed! :eek:

One of the main reasons I got the H2S is because of the huge print bed and that it's an enclosed printer. Using multiple colors was kind...

Mostly I print just one colour, and if I have a need for a second or third colour it’s not that hard to swap out one for the other, the...

Sell it, you won't lose much $$$. The AMS and the wastage is a definite disadvantage. I bought the Snapmaker U1 on a whim and it has...