Latest activity
-
pharmacist replied to the thread Printprism: I have bought it to test its capabilities and quality of the rgb profiles.That is strange: I tried to use my Epson WF-7840 scanner if it would give a good profile (officially not supported) and to my... -
-
pharmacist replied to the thread Printprism: I have bought it to test its capabilities and quality of the rgb profiles.OK good to know. So you use the ET-8550 scan engine of the PrintPrism to generate the profile. Maybe Mike Chaney would be pleased that...
-
Kknowing replied to the thread Script for Printer Calibration on Windows, MacOS snd Linux (free to use and modify).Sorry for my last update. The example premade targets what had very short patches in reading-direction were horrible to use and cause...
-
ohtoulouz replied to the thread Printprism: I have bought it to test its capabilities and quality of the rgb profiles.Yes, I know. But space on my desk is limited ! By the way, I bought PrintPrism and made profiles with the XP-970 and the result is... -
pharmacist replied to the thread Printprism: I have bought it to test its capabilities and quality of the rgb profiles.A cheap scanner supported by PrintPrism is the Canon Lide 300 (about 70 euro).
-
Redbrickman replied to the thread Picture Of The Week (POW) Information and Submissions.For all the Valentines out there -
-
ohtoulouz replied to the thread Printprism: I have bought it to test its capabilities and quality of the rgb profiles.Thank you @pharmacist for the 560 patch target that you posted for me in the other thread ! I was just thinking of giving a try at...
-
ohtoulouz reacted to pharmacist's post in the thread How to generate a simple RGB printer profile using ArgyllCMS and the CR30 colorimeter/spectrophotometer with
Like.
@ohtoulouz Here I have a 560 patch target for the CR30 that needs 2 sheets of A4 to be printed and should be more accurate. -
pharmacist replied to the thread How to generate a simple RGB printer profile using ArgyllCMS and the CR30 colorimeter/spectrophotometer.@ohtoulouz Here I have a 560 patch target for the CR30 that needs 2 sheets of A4 to be printed and should be more accurate.
-
Kknowing replied to the thread Script for Printer Calibration on Windows, MacOS snd Linux (free to use and modify).Hi All, I made an update, solely on the folder with Pre-made Targets. See Argyll_Printer_Profiler. I organized it a bit better, and...
-
Kknowing replied to the thread Script for Printer Calibration on Windows, MacOS snd Linux (free to use and modify).Thanks for the tip. Anyone if free to help out with this. I am swamped with things and cannot really do that now. I have asked a couple...
-
Kknowing reacted to riclin's post in the thread Script for Printer Calibration on Windows, MacOS snd Linux (free to use and modify) with Like.
Perhaps slightly off-topic, but if ever you do feel inclined to port this to Windows, try passing the whole palava to Anthropic Claude...
-
riclin replied to the thread Canon pro 10s streaks troubleshooting.Good spot Peter - I use Linux so can't use the Canon s/w - hence using web interface instead. So both are options. Now - did this... -
Redbrickman reacted to PK Project Manager's post in the thread Picture Of The Week (POW) Information and Submissions with Like.
Huge congrats, @The Hat! Your photo just snagged Picture of the Week and is now featured on our homepage! 🎉📸
-
riclin replied to the thread Canon pro 10s streaks troubleshooting.I think it's in the custom settings section of the web interface (which assumes of course that your Pro10S is networked, not just USB)
