Latest activity

I’m hoping someone here might have some insight because this has been driving me a little nuts. I’m on a Windows 10 PC using a...

Following my previous post, i'll now document the refilling process I was fortunate enough to find a set of those bottle on vinted...

Thank you, Pharmacist. I've got profile problems, so I've ordered one.

Yes, the problem is that Argyll installs its own driver, although you can use Device Manager to swap between the drivers if you want to...

I understand that you are concentrating here on producing a good paper profile, but you have not mentioned your print viewing conditions...

I have a HP officejet 3835, that the paper keeps getting fed in crooked when I am printing. It keeps gettng fed in at this angle (see...

Hello Everyone. After a bit of research i'm now able to share what i learnt about the Epson 378/378XL - 478/478XL cartridges. The...

Fwiw, I had to remove Argyll as it was causing some USB port issues with the x-rite and Calibrite software. Seems it was scanning the...

Ok i was thinking it was a shift on the Red color of the generated profile

Ok i was thinking it was a shift on the Red color of the generated profile

https://www.printerknowledge.com/threads/canon-pixma-pro-1-partly-demystified.15319/ Indeed it wasn't you, sorry. I meant no offenses...

I have done a test with a very difficult printer that prints with a huge sepia hue especially in the greys: the Canon TS705 using...

OK Folks, yesterday I have done some tests, but I did make some errors: one should not use the sharpening function to print the target...

Today I bought a license of the Printprism to generate rgb printer profiles. I have the ET-8550 printer/scanner so I will give it a try...

There a many small (250g) spool adapter designs to fit the AMS (including this one of mine for EONO spools). If PLA is breaking in the...