Latest activity
-
Redbrickman replied to the thread How many of us are still refilling ink cartridges?.Like NIfty I gave up on inkjet for normal office printing and bought a laser as I may not print anything for several weeks sometimes but... -
Redbrickman replied to the thread Anniversary update on Standard Lamp Mark V...Yes if you are able to prevent the new printer from getting draughts then ASA would work but I fear without an enclosure there would be...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Mine reads a white point of the tile: 91.22 -1.09 0.17 probably not a concern, as each tile is bound to each individual spectro. -
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.ok today I tried a newer 247-patch target and unfortunately there is an error when executing colprof: The message: warning: colprof...
-
-
LLothman reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with
Like.
yes it has a white tile to calibrate on: it is magnetically attached on the spectro. -
EEpatcola replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.With a collar like I suggested and a patch pitch notched rule you would only have to align the rule for each column the CR30 would just...
-
LLothman reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
Yesterday I received a cheap aliexpress colorimeter that measures patches on surfaces and it gets only LAB-values registered. Is there...
-
x64 reacted to Ink stained Fingers's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
This CR30 appears to be quite an interesting spectro; is there any calibration mode - or a reference tile as with the XRite spectros ... -
Ink stained Fingers reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
yes it has a white tile to calibrate on: it is magnetically attached on the spectro. -
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.yes it has a white tile to calibrate on: it is magnetically attached on the spectro.
-
-
Ink stained Fingers replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.This CR30 appears to be quite an interesting spectro; is there any calibration mode - or a reference tile as with the XRite spectros ...
-
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I think printing a special mall that uses the adjacent patches as kind of reference to clearly define the position of the scanning hole...
-
pharmacist reacted to Epatcola's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
Thanks both for the work you have done on this device. I had a CR30 delivered today. I think with care you could go smaller than 15mm...
-
EEpatcola replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Thanks both for the work you have done on this device. I had a CR30 delivered today. I think with care you could go smaller than 15mm...
-
-
EEpatcola reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
I will already upload my new target that has 247 patches of which 21 grey steps included for those interested. It fills up the whole A4...
