Latest activity

I properly reinstalled the item, but the error is still present; as soon as I turn the printer on the cartridge holder violently hits...

The surface is of the PLA print is indeed slightly rough, so the printer should have a good grip to pull the tray inside the printer and...

I would be tempted to stick a sheet of paper on the bottom of the tray, possibly removing the bottom 0.3mm of the model first. I think...

Notice that in the service manuals I linked to that sliding surfaces and maybe bearings are lubricated, but no gears. Here is a shot of...

Thar wasn’t grease, that was saliva.. :lol: I too would never grease plastic gears..

That's a odd conclusion, and inherently false. Although grease is almost never a requirement for any mechanical system to operate, it is...

Thanks for the link. But how new is newer? And how old is old? The link is for a v6220. Will 6210 work with a TS8350? Apart from...

I would be tempted to stick a sheet of paper on the bottom of the tray, possibly removing the bottom 0.3mm of the model first. I think...

I cannot increase the design too much, because it must be considered as thick paper. I already increased the thickness slightly and it...

I don't know about that. Without knowing exactly how the ET8550 handles the tray, your idea may work or, on the contrary, because of the...

I could fight the problem of the slight slope with free transforming (rotating) the image with -2.2 degrees in order to get the image...

The long and winding road.... Epson and Canon sometimes seem to enjoy annoying the customers with the features of their drivers. As you...

This video shows an Epson wiper blade but you get the idea:

ZX Spectrum 48K... *wistful faraway look... promptly erased* Good grief but typing out the bug ridden code from computer magazines was...

Better now, but still that strange slight angle when printing: