Latest activity

Hello everyone, I just wanted to know what the service mode pin code for Epson M5799 was so i could do a deep or strong head cleaning...

Yes, I have a small piece of paper that I have cut to right size and rolled up. I insert it to fool the printer to think the lid is...

Hi apotheker, I think you make a good choice. I is not the fastest but it runs like a tank. AND prusa is famous for the upgrade sets...

Thanks Ron and others, I am looking at the Prusa MK4S printer at this moment and it seems to fit my needs. It is not cheap I must say...

After several goes at cleaning again, this is what I'm getting. It's worse if anything. I'm not sure if it's ink starvation as I've had...

Did you get this info from a service manual? One lubricant for the thing that the head slides on and one for the gears? I actually had a...

I was printing stickers on glossy vinyl sticker material, did a few sheets that seemed to be okay then about halfway through one of the...

So it's done now. I have fixed it. I have cleaned up my mess. :weee The printer is fully functional now. I can print documents, and it...

The proper grease to be used is found in the service manual, which sadly is nowhere to be found. For an old printer like the Pixma...

Coloured view

Totally agree with what @Tony4597 said about Orca possibly nudging Bambu out. I’ve had a very similar experience. The built-in...

Here is something to read! https://makezine.com/article/maker-news/why-is-open-source-hardware-not-working-for-3d-printers/ That’s why...

That's what I always say. If it isn't broken, don't fix it. But I allowed this printer to bring out the worst in me. Unfortunately. On...

I got it. It's out! Look at where they placed that screw. Unbelievable. If it was on the opposite side, I would not need to tear the...

I agree with this when regarding a printer that is less than 10 years old, however all mechanical parts get some synthetic grease from...