The Changeover finally happened with my Pro 10 printer..

[The Hat]

It was time to top up my first set of carts in the Pro 10 printer, lucky I did..

The grey was almost out and the yellow was missing in the nozzle check, as it turned out the yellow compatible cart was leaking and had no ink left, so I dumped it and two other Compliables after removing their chips.

With a new set of OEM carts installed, I had the time to make up two more sets of OEM carts that I had got from various places, I didn’t reckon I’d have enough chips to make two complete sets.. Thanks to @palombian and @websnail..

P.S. I’ve still got some 60 odd Pro 9500 carts, most full with ink and others with CO Optimiser..

 

[palombian]

If it is the Precision Colors CO Optimiser, it performs very well in the PRO-10, I see no difference with OEM.

 

[The Hat]

Precision Colors CO Optimiser, it performs very well

And yet Precision Colours don’t use their own CO Optimiser in the Pro 1000, I wonder why ?, is their CO Optimiser that bad, I’ve never had a clog in the CO Optimiser nozzles no matter which product I’ve used..