The big BCI-3eBK cart Purge/Clean method/instructions?

[optimizer]

I'd searched before posting the prior message, and have again, but haven't found the BCI-3eBK cleaning procedure.

What is the latest method for purge cleaning the the big BCI-3eBK cart?
Does anyone know the web link to the nifty-stuff procedure for this?
In place of the 3/8th Vinyl tube, something else bigger had to be used to fit the bigger exit port of the BCI-3eBK cart.

Thanks

 

[leo8088]

You can attach a mini hose fitting to the bottom of an orange cap of the cartridge. Cut off a small piece from the center of the silicone seal inside the cap. You can ten connect a small hose between the cap and a syringe. Use rubber band to secure the orange cap to the bottom of your BCI-3ebk cartridge. The syringe can be filled with a water/Ammonia mix fluid. You can flush the cartridge by injecting the fluid into the sponge this way. The problem is this fitting is hard to come by. I got mine from a flea market seller. I don't think I can find the same fitting again. So you will have to be innovative to find or fabricate a fitting yourself.

 

[optimizer]

It seems as though 5/8th or 1/2" tubing might work?

http://www.nifty-stuff.com/forum/viewtopic.php?id=1310&p=1