alexandereci
Printing Ninja
- Joined
- Feb 12, 2006
- Messages
- 231
- Reaction score
- 1
- Points
- 99
Hello guys!
Can anyone tell me how to reset the IP1000's waste ink warning? From searching, I found out that I can use my printer by:
1. Turn off printer, unplug
2. Open door, hold power button
3. Plug printer
4. Close door, release power button
However, it seems that everytime I turn on my printer, I have to do the above steps all over again. Is there a way around this?
Also, has anyone taken an IP1000 apart to clean the waste ink sponge? I tried opening it up, but doing it myself without instructions is only begging for trouble.
Thanks in advance!
Can anyone tell me how to reset the IP1000's waste ink warning? From searching, I found out that I can use my printer by:
1. Turn off printer, unplug
2. Open door, hold power button
3. Plug printer
4. Close door, release power button
However, it seems that everytime I turn on my printer, I have to do the above steps all over again. Is there a way around this?
Also, has anyone taken an IP1000 apart to clean the waste ink sponge? I tried opening it up, but doing it myself without instructions is only begging for trouble.
Thanks in advance!