pyToneRIP Black & White Printing without limits.

[df11]

Hi Alexander,

de-installation of b244 and installation of b248 went smooth. Just a few moments, no problems at all. Perhaps a note about the Windows SmartScreen warning coming up in README would be helpful. Not sure, everyone knows how to proceed further on. Just an idea.

Regards,

Ronald
--

Yes, you are right, you need to add this mention. Since the program does not yet have a subscription certificate from Microsoft, I am working on it.
In the future, when the program reaches a stable first release, I plan to distribute it through the Microsoft Store, then there will be no home messages.

 

[rjanowsky]

Do you have some CxF files at hand? I'm using Argyll-CMS with an old i1Pro and try to convert the .ti3 files to .cxf Format for use in MakeQuad. Could use this measurements to get the converter script running. P600/P800 calibration measurements were perfect.

 

[df11]

Do you have some CxF files at hand? I'm using Argyll-CMS with an old i1Pro and try to convert the .ti3 files to .cxf Format for use in MakeQuad. Could use this measurements to get the converter script running. P600/P800 calibration measurements were perfect.

I have a better offer for you, I can give you a link from where you can download i1Profiler 3.1.1 the latest version that supports i1Pro + Patch, which activates all functions by removing all license restrictions.
See more of this https://www.russellcottrell.com/photo/optimization/
I do not use cxf in my practice, I save the measurement in CGATS

I think this will be useful to you
https://www.russellcottrell.com/photo/optimization/cxfGeneratorCustomLab.htm

 

[rjanowsky]

Thanks a lot. I will look at this link. By the way CGATS files are also very welcome. I need them only to analyse the structure and convert from .ti3 to cxf or CGATS.

Problem solved. Could create the CGATS with the help of i1Profiler - Measure Chart.