Fano
Getting Fingers Dirty
I have a slight problem with my Pixma 3000 (European Model)
It had a slight fall recently and the printing of CD's has been affected.
The printer is printing paper fine albeit there are a few slight black tracks on the right edge of a sheet.
The print quality is fine.
When I try to print a CD it says the inner cover is closed when its open.
I presume some kind of sensor/switch may be damaged and the printer thinks the door is closed.
The printhead seems to rub off the cd tray too as if its up too high.
Anyone encountered this problem before and if so how can it be remedied.
Many Thx
It had a slight fall recently and the printing of CD's has been affected.
The printer is printing paper fine albeit there are a few slight black tracks on the right edge of a sheet.
The print quality is fine.
When I try to print a CD it says the inner cover is closed when its open.
I presume some kind of sensor/switch may be damaged and the printer thinks the door is closed.
The printhead seems to rub off the cd tray too as if its up too high.
Anyone encountered this problem before and if so how can it be remedied.
Many Thx