piese of plastic come out with paper Epson ET-2760

vaider

Newbie to Printing
Joined
Jul 25, 2022
Messages
5
Reaction score
1
Points
3
Printer Model
Epson ET-2760
Piese of plastic come out with paper and i dont known how to find place to put him back.
H E L P M E !!!





20220725_135653щ.jpg
come out with paper and i dont known how to find place to put him back
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
Is the printer still working ? did you open the printer cover at any location for some reason ?

Do you somewhere see a hole, an opening in the cover where that part would fit - e.g. a window for a display ? If not I just would leave it as it is, just use a piece of tape and stick it to the back of the printer, you may find that location later.
 

vaider

Newbie to Printing
Joined
Jul 25, 2022
Messages
5
Reaction score
1
Points
3
Printer Model
Epson ET-2760
yes printer working, but leaves white shades
 

vaider

Newbie to Printing
Joined
Jul 25, 2022
Messages
5
Reaction score
1
Points
3
Printer Model
Epson ET-2760
Please print a nozzle check and post a scan here to show the 'white shades'
surprisingly, there are no gaps at all. But afer third time cleaning head, and now from to start at the beginning everything is black
20220725_161743.jpg
20220725_161423.jpg
20220725_161157.jpg
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
You have black spotches at the edge of the paper - can you check how the cleaning unit looks - is there any pigment smear ? You can disengage the printhead by powering off and on the unit and pulling the power cable when the printhead starts moving.

Are you trying to print on CD ? I don't think that would work, you cannot raise the platen gap that much.
 

websnail

Printer VIP
Platinum Printer Member
Joined
Oct 27, 2005
Messages
3,661
Reaction score
1,345
Points
337
Location
South Yorks, UK
Printer Model
Epson, Canon, HP... A "few"
I have a beat up ET-2750 in the workshop that hasn't been thrown out yet. I'll try to remember to take a look tomorrow and see if I can spot where that plastic bit has sprung from.
 

vaider

Newbie to Printing
Joined
Jul 25, 2022
Messages
5
Reaction score
1
Points
3
Printer Model
Epson ET-2760
I have a beat up ET-2750 in the workshop that hasn't been thrown out yet. I'll try to remember to take a look tomorrow and see if I can spot where that plastic bit has sprung from.
ok
 

websnail

Printer VIP
Platinum Printer Member
Joined
Oct 27, 2005
Messages
3,661
Reaction score
1,345
Points
337
Location
South Yorks, UK
Printer Model
Epson, Canon, HP... A "few"
Have gone through the ET-2750 I have here and the only place I can find plastic like that is protecting the tubing for the CIS system and it's a longer piece so not much help I'm afraid.
 

vaider

Newbie to Printing
Joined
Jul 25, 2022
Messages
5
Reaction score
1
Points
3
Printer Model
Epson ET-2760
Have gone through the ET-2750 I have here and the only place I can find plastic like that is protecting the tubing for the CIS system and it's a longer piece so not much help I'm afraid.
thanks anyway
 
Top