- Joined
- May 29, 2007
- Messages
- 3,290
- Reaction score
- 1,911
- Points
- 333
- Location
- Ghent, Belgium
- Printer Model
- SC-900 ET-8550 +18100 WF-7840
I sold my previous K1 Pro, because I wanted multi-colour printing:
new Creality K2 Pro with 2 CFS-boxes
- Thread starter pharmacist
- Start date
- Joined
- Jan 18, 2010
- Messages
- 16,263
- Reaction score
- 9,196
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Now have 3 Ender-3 V3 Plus SE/
- Joined
- Nov 3, 2004
- Messages
- 3,170
- Reaction score
- 1,563
- Points
- 337
- Location
- Bay Area CA
- Printer Model
- CR-10, i560 ,MFC-7440N
Keep us posted!
When I got my Bambu H2s, I knew I wouldn't print multi-color very often... and didn't need a huge bed very often either.
... turns out it's even less often than I thought. I figure 95% (or more) of my prints (97% being PLA and the rest TPU) all work just fine on my A1-mini... and almost always single-color.
I did a dual-color print for a friend, but it was a single color change at one level, so it was actually easier to just swap out the spools manually mid-print.
When I got my Bambu H2s, I knew I wouldn't print multi-color very often... and didn't need a huge bed very often either.
... turns out it's even less often than I thought. I figure 95% (or more) of my prints (97% being PLA and the rest TPU) all work just fine on my A1-mini... and almost always single-color.
I did a dual-color print for a friend, but it was a single color change at one level, so it was actually easier to just swap out the spools manually mid-print.
Last edited:
