bobby_dread
Newbie to Printing
- Joined
- Jul 12, 2006
- Messages
- 1
- Reaction score
- 0
- Points
- 7
Hey, all.
I bought a used iP5000.
Good news - it prints.
Bad news: it needs a new diaper. the collection pad alarm is going off. Must have seen some heavy use.
I plan to clean these pads myself. I have a maintenance manual which indicates where the pads are.
What I need is some sort of manual or guide, which will help me to safely disassemble the iP5000 such that I can get at the bits that need cleaning. The exploded views in the manual that I have aren't likely to help me much.
Any suggestions are more than welcome.
Thanks!
I bought a used iP5000.
Good news - it prints.
Bad news: it needs a new diaper. the collection pad alarm is going off. Must have seen some heavy use.
I plan to clean these pads myself. I have a maintenance manual which indicates where the pads are.
What I need is some sort of manual or guide, which will help me to safely disassemble the iP5000 such that I can get at the bits that need cleaning. The exploded views in the manual that I have aren't likely to help me much.
Any suggestions are more than welcome.
Thanks!