espon sx218 problem

[ARDV]

hello

i have a problem with my espon sx218

this is what i get when i check nozzles
ww w. hotimg.c om/direct/MKhtRCU.jpg

i made lot of head cleaning (more than 10), but the same problem
also tried to change the cartridge but same problem

please help

 

[santer]

Was the printer left unused for a while?

Download purge.zip here,

http://www.inksupply.com/purging.cfm

or make your own pattern for all ink colours, set it to best photo and glossy photo paper though only use plain paper. Print a few to see if the output improves.

If no improvement, you could either use old cartridges to fill with head flush, or get a set of refillable cartridges if you are likely to use them with ink when the printer is running correctly. Using cartridges filled with head flush, print the purge pattern until all you get is a blank sheet of paper. Insert a new set of cartridges or remove the head flush from the refillables to replace with ink.

Run a head clean, then print a couple of the purge patterns. You should see some output, if so, run a head clean followed by a couple of purge patterns.

Leave the printer for an hour or so, then run a head clean followed by a couple of purge patterns.