grandsire02
Newbie to Printing
- Joined
- Dec 29, 2006
- Messages
- 3
- Reaction score
- 0
- Points
- 7
I have just purchased an Epson R800 and seem to have a problem with (I assume) the driver installation. The driver appeared to install OK from the CD ROM supplied (I got a screen confirming this), except that a further screen appeared saying Found new hardware wizard. Cannot install this hardware. There was a problem installing this hardware. An error occurred during the installation of this device. Access is denied.
The printer appears to be working, well, sort of - it prints text documents OK though the colours on a photo I printed were not good (too light), and it won't print at all from one application (Paint Shop Pro)
Each time I turn on my PC I get the Found new hardware bubble in the bottom RH corner of the screen. When I click on this I get a further bubble that reads Found new hardware a problem occurred, hardware might not work properly I also get the Found new hardware wizard screen referred to above.
Ive uninstalled (via Add and Remove Programmes) and reinstalled the driver 2 or 3 times, rebooting each time but it makes no difference.
Im running XP Home SP2.
Where do I go from here?
The printer appears to be working, well, sort of - it prints text documents OK though the colours on a photo I printed were not good (too light), and it won't print at all from one application (Paint Shop Pro)
Each time I turn on my PC I get the Found new hardware bubble in the bottom RH corner of the screen. When I click on this I get a further bubble that reads Found new hardware a problem occurred, hardware might not work properly I also get the Found new hardware wizard screen referred to above.
Ive uninstalled (via Add and Remove Programmes) and reinstalled the driver 2 or 3 times, rebooting each time but it makes no difference.
Im running XP Home SP2.
Where do I go from here?