- Joined
- Nov 3, 2004
- Messages
- 3,050
- Reaction score
- 1,412
- Points
- 337
- Location
- Bay Area CA
- Printer Model
- CR-10, i560 ,MFC-7440N
I had some fun today! 
I noticed some extra t-nuts that came with the CR-10. I also realized how much I missed the custom tool holder for my MP Mini. So I imported it into Tinkercad and made a bunch of adjustments and am VERY happy with the results!
NOTE: I know these will get in the way when I do tall prints... which I'm realizing I very rarely do. The nice thing is that I can pull the tools out super easily if I do a tall print and the bracket shouldn't get in the way.
So, this wasn't only a really fun project, but also my tallest print to date! You'll notice I added some blue tape to the base (raft) of the print just as insurance if it tried to wiggle lose during the up-most printing! (I added the tape 1/4 of the way through the print while it was printing).
Here's the "thing" for the MP Select Mini: https://www.thingiverse.com/thing:1688459
I noticed some extra t-nuts that came with the CR-10. I also realized how much I missed the custom tool holder for my MP Mini. So I imported it into Tinkercad and made a bunch of adjustments and am VERY happy with the results!
NOTE: I know these will get in the way when I do tall prints... which I'm realizing I very rarely do. The nice thing is that I can pull the tools out super easily if I do a tall print and the bracket shouldn't get in the way.
So, this wasn't only a really fun project, but also my tallest print to date! You'll notice I added some blue tape to the base (raft) of the print just as insurance if it tried to wiggle lose during the up-most printing! (I added the tape 1/4 of the way through the print while it was printing).
Here's the "thing" for the MP Select Mini: https://www.thingiverse.com/thing:1688459
