because they sell them...
As far as I understand - noone knows why and the only plausable explanation is that they have bigger volume (i.e. one large camera will do the same job).
What's the pluses and minuses of "standard CISS tube connection" and "Less standard CISS tube connection" ? Then I can probably guess the advantage of your method.
You work 8 hours per day ? I've spent years working much more than that - so after 8 hours one can find motivation to do something...
You overquote and give no useful information.
Please explain what exactly I don't understand and how it can be useful to other readers ?
The soap container will reduce it 2-3 times as it is larger.
Your idea will certainly work, but it will not be automatic - you will loose ink with every...
For the benefit of those who are looking for tik-tak box - you don't really need it - any tank/container even without cap will work. You can cover the top of such open container with a piech of paper or plastik/don't need to glue it - simply put in from above.
I recommend to use a soap...
What is wrong ? The "office" series tanks/donnors have one small round hole, the "pro" series tanks/donnors have large connection. Both can be refilled by openning a cap and adding ink, the difference is that in "office" series tanks/donnors you will need to use syringe to pump air from the...
You explain youself very complicately: what is minimal height - of the system or the lowe end of the ink pipe ?
Can you also explain your reasons for using needle. I know what the other guy said here. As I see ready systems have large connection between ink and air chamber.
Lack of time does not turn incorrect statements into correct ones. If you mean one thing but say a dfferent one - I refer to what you say not to what you might have thought about.
It may be easier (twice !) to not cut the tik-tak box before glueing it - it will remain longer/bigger... I don't...
no - the ink tube goes quite low - so ink will stark coming to the box throuth it and then will go to ventilation pipe - this is why the bow will be outflown and ink will go above - to the ventilation pipe; whether it will come to the highest curve of the ventilation pipe depends on the original...
Can you please explain - how does it work ? I thought that for air it does not matter how high the tube is - it will still flow at the same speed. I suspect that if you open the cap at the bottle - the box will oveflow and the air pipe will be full of ink as well - depending on the level of...
even if it is linear it is not 1:1 ! after the 1 ml the balancing level will start to change
If you can give a link for that working model - I would definitely take a look on it.
I would rather use a bottle but would simply put it on the side...
I doubt that they can work. Firstly, if they would - chineese would be already producing them...
Secondly, the corelationship between the height produced by water and weight of the bottle in most cases will not be linear because the weight of the dissappeared ink will represent only a fraction...
you can rotate the bottle instead...
Can you avoid Marriotte tank altogether by simply using large horizontal bottle, e.g. box for CDs ? or
I understand what Marriotte tank is for, but don't understand - where the problem of different flow speed comes from - from the height of the ink in the...