Search results

  1. B

    insight on refilling

    good insight that may have been it, it wouldn't even get to the point to be able to perform a nozzle checkt 504 error appeared before that. Already changed the chips over, im ioing to be away for a week or so but will report back upon testing those.
  2. B

    insight on refilling

    Interestingly, i found a used Maxify 2320 (2 years Old) for $10 so i bought it and tested it. SAME result using the aftermarket Carts in IT( with OLD firmware) , works with OEM So i am assuming it is literally an issue with the cart not the chip. I am going to switch the ARC chips form the...
  3. B

    insight on refilling

    you have repeated to insert OEMs. The OEMS are empty, i tried it again, i get an error that the are low /empty, error b504 IS gone, but it reappears as soon as i insert the refilled carts. ADDITIONALLY, as it goes through the cycle of checking for flow, the BLACK is completely emptied by the...
  4. B

    insight on refilling

    I tried that, but as soon as i put the aftermarket carts back in, same error. After some back and forth with the seller on Alibaba and and escalation through "Trade assurance" i was refunded. sSince they dont want the carts back i am going to switch the chips over to the stock tanks and go from...
  5. B

    insight on refilling

    So, i was able to change out the carts without issue, printed a couple pages but then received a b504 error, i have followed the directions on the printer, i have followed the directions on several refilling sites, i havent hard reset the printer yet. will try that later when i have more time. I...
  6. B

    insight on refilling

    @stratman Thank you for the response i appreciate your input and the advice regarding labeling the stock chips i dont think anyone purposely mislead me, but i felt a bit chastised as it i had intentionally "not talking the advice you were given"> Ill update as to the result of the escalated...
  7. B

    insight on refilling

    "accept your mistake" Wow, if you look back in the thread, the SECOND post (stratman ) indicated i should look at "Refillable, larger capacity cartridges. Third party ARC cartridges on Alibaba" No one (YOU) countered that direction, the 20 day later stratman on july 26th stated i should...
  8. B

    insight on refilling

    I did ,i simply said that they weren't the same and the refill-instructions did not work, i asked for a full refund. They rejected that proposal and said they wanted video evidence of trying to refill the cart> lol, it doesn't accept video so i uploaded still shots of the carts i received...
  9. B

    insight on refilling

    the picture I posted is the picture the supplier sent me after I inquired about filling instructions. the one i posted with the arrows is the style i received.
  10. B

    insight on refilling

    Ive run into an issue: According to the direction ive seen i should remove the clear plug, refill and then replace,this includes ( poor) direction by the manufacturer then remove the colored plug. I began to do that when i discovered the "hole" behind the clear plug has no outlet into the tank...
  11. B

    Maxify MB2720 Strange Duplex (left Margin) issue

    Resolved by Unchecking "reverse pages" original issue: I have been trying to narrow down an issue: I have several PDFs that are about 18 pages long(for wifes hobby)> I want to print them double sided and bind them in a folder.( i want an extra margin on the left hand side of each(front and...
  12. B

    Maxify MB2720 Strange Duplex (left Margin) issue

    Issue resolved please delete thread
  13. B

    insight on refilling

    Mine arrived with similar instructions: i do have a question: After the initial refill process and the tank(s) need to be refilled, should the (colored) airhole plugs be placed BACK before the fill plugs are removed to fill the tank?(and then removed again after filling and replacing fill plugs?
  14. B

    insight on refilling

    OK, thank you > Is there a fill line designated on the catridges themselves or is a speciffic volume i should use?
  15. B

    insight on refilling

    Link to the thread speciffcially? I had ordered these form alibaba and as i posted in response to the hat, maybe i should order the ones he listed at aliexpress...to be safe. https://www.alibaba.com/product-det...ml?spm=a2700.7724838.2017115.1.2eb77b9dqIJbUd
  16. B

    insight on refilling

    Sorry for the delay in response, thank you...it seems i may have jumped the gun a bit an ordered through alibaba rather than aliexpress> https://www.alibaba.com/product-detail/BOMA-Refillable-Ink-Cartridge-With-ARC_60555866225.html?spm=a2700.7724838.2017115.1.2eb77b9dqIJbUd im wodmering if i...
  17. B

    insight on refilling

    yes thank you, i did find a seller on alibaba just before you posted that sold a single set, that was the issue originally. Looking forward to continued use of this unit. Thank you again for all the help and patience.
  18. B

    insight on refilling

    Are there any specffic Stores on Alibaba that you have used or recommend for ARC carts or any advice in sorting through the ones that are avaialble? Any advice or insight on ink in general? Thanks !
  19. B

    insight on refilling

    UPDATE: I discovered that if i change the paper setting to Matte Photo paper the MAXIFY MB2750 takes and prints on 110lb cardstock (single sided, but that is just fine !) I ampleased, this is a nice machine and like the ease of (it appears) of souring catrs and ink. I shall be keeping this...
  20. B

    insight on refilling

    additioanlly, any other sites than the ones you have posted that you recommend for sourcing either Carts/ink or toner( if any) alibaba?
Top