Search results

You can also buy ArgyllPro. https://www.argyllpro.com.au This is a Android app Works on phones and tablets And makes almost all conventional spectrometers and possible colorimeters (for emitting sources) Display and storing several kinds of readings. I use it for reading color temperature in...

I'm one of the few in the world who worked with PC/MSdos 1.0 :) And many years experience with the early terminal based Linux distros.

If the printhead technology is the same as used with their professional printer heads? Then there is no hope. Canon states that the printhead are consumables! The printhead have very very much print nozzles more than 30000! The printer checks during printing and nozzle checks if a nozzle is...

The most important thing is NEVER unplug your printer from the power-lead! About the automatic headcheck feature, I know my old Canon IPF5100 had a automatic check and clean routine. From all the other printers i know off this feature is not mentioned in any manual! So beter place a reoccurring...

These indents are probably the beginning of a lot of issues. And end of your printer. I know my P900 died not so long ago. The two indents come from the paper transport mechanism from the sheetfeeder. If you look very good on the surface of your paper then you could see a faint streak with...

Hallo apotheker, Again! Your the Live saver! A perfect explanation of this dark knowledge :ya:love:thumbsup there is a extra benefit to use the xRite profile generating and reading tool is that in linux terminal argyll no audio or visual hints shows. And xRite show then very good. Still...

YES. I had to buy a new (ikea) Bror roltafel. Moved my already big also ikea desk about 20cm to make space for th monster. And it is a very loud printer. But all of these I was used to with my Canon IPF 5100. 😜

Hallo Apotheker, Weer een poosje geleden. ( back to English) After many serious troubles with my P900 many headstrikes and paper load and travel issues. I have decided to get a divorce 😢 So I’m now in joyful expectation of my new bought of the much bigger and sturdier brother the P5300...

:thumbsup

Hello, I'm a fan of non OBA papers to print my photo's. Luckily i own a 'efi es-2000' OEM X-Rite i1-pro2. So it can measure the whole-ish light spectrum visible and UV. with M-0-1-2 modes. Now my question: How to set the -i and/or -f parameters in the ArgyllCMS colprof command? For paper...

Have you seen a Bambu non x1c from the inside? Two steel tubes with bearings for the x-as (the X1c this is carbon.) And bamboo has also a steel frame! For stiffness. Last thing about this topic. Btw. I never owned a Prusa. But several slingers and Corey’s. And I was and still happy with the...

Hoi Apotheker, You need another 2 pieces for your 3D environment. You bought the filament dryer. But that only effective to dry you filament. After that you need to store the filament in a dry box. Otherwise you dried your filament for nothing than the electricity cost. :eek: You have to make...

@Redbrickman agree. Orca slicer is the one to go now a days. And now the only one for my X1c. In lan only mode. Fusion 360 is a mixed feeling. On windows works ok I presume. But on my Mac I had many issues. And the fact that it is cloud based. And the many outages lately. Makes it less...

I’m from the Netherlands. And yes I bought a lot of stuff from them. But on filament are they not the cheapest. Compared sunlu and the Chinese shops on ali or via there own sites. Only when I need filament fast. Then comes 123 in the picture. @parmacist now you have to learn 3d modeling. A...

Creality is a well known chinese company. And has grown in quality after the boom of bambulabs. They tend to work as designed. But my experience is that in the long run they wear faster. But for a first 3d printer I think this is the better choice. Also because a Core xy have a beter surface...

Sure there are flaws. When the 4 came out there were flaws too! But the benefit of a trustworthy company is that they have a high customer support. Prusa can’t afford not to support there customers. All printers when they are new have issues. And a good company solve those issues. Most of them...

Hi apotheker, I think you make a good choice. I is not the fastest but it runs like a tank. AND prusa is famous for the upgrade sets for older models. There is an upgrade from the mk4 to the core one! There are several Chinese filament providers. Momentarily I use Petg from sunlu. But I advise...

Here is something to read! https://makezine.com/article/maker-news/why-is-open-source-hardware-not-working-for-3d-printers/ That’s why I go for voron or prusa! The only two real open source 3D printer designers. I choose for open and not closed. We have seen it with Bambulabs and All the other...

Why did it take so long? Because manipulate 70+ kg in a tiny space in the attic on my own. Is a heavy task. If it was for the faulty parts! Then it was a simple job. Replace the two print heads (in a Canon professional printer) the are end user replaceable. But for printer 10+ years old and out...

Perhaps you should buy a new one. And dismantle your old one. A new one cost you around €230,— and probably cheaper than buying spare parts. And the time to find the problem part(s). And I hope you made photos of your current dismantling phase. Then you have for the future lubricating your...