Search results

I saw no indication of any sensors in that video and it was in a language I do not understand. This unit was only about 10 days out of the box. that said the I've already thrown the Epson away... it felt "cheap" Even for the short time that it worked

Thank you , I have done a lot of that, thought I wish I knew what the sensors actually looked like ! Ive already ordered a d new printer ( A Canon, as I've had such great luck with them, last worked fine for almost 8 years)

ET2400 had been sitting new in a box in storage as a back-up for several years(it was given to use by someone who bought it, but circumstances dictated they didn't need it). My Canon TS 6020 finally died after YEARS of solid use, so I put this into service on (First Time Printing 06/09/2025)...

good insight that may have been it, it wouldn't even get to the point to be able to perform a nozzle checkt 504 error appeared before that. Already changed the chips over, im ioing to be away for a week or so but will report back upon testing those.

Interestingly, i found a used Maxify 2320 (2 years Old) for $10 so i bought it and tested it. SAME result using the aftermarket Carts in IT( with OLD firmware) , works with OEM So i am assuming it is literally an issue with the cart not the chip. I am going to switch the ARC chips form the...

you have repeated to insert OEMs. The OEMS are empty, i tried it again, i get an error that the are low /empty, error b504 IS gone, but it reappears as soon as i insert the refilled carts. ADDITIONALLY, as it goes through the cycle of checking for flow, the BLACK is completely emptied by the...

I tried that, but as soon as i put the aftermarket carts back in, same error. After some back and forth with the seller on Alibaba and and escalation through "Trade assurance" i was refunded. sSince they dont want the carts back i am going to switch the chips over to the stock tanks and go from...

So, i was able to change out the carts without issue, printed a couple pages but then received a b504 error, i have followed the directions on the printer, i have followed the directions on several refilling sites, i havent hard reset the printer yet. will try that later when i have more time. I...

@stratman Thank you for the response i appreciate your input and the advice regarding labeling the stock chips i dont think anyone purposely mislead me, but i felt a bit chastised as it i had intentionally "not talking the advice you were given"> Ill update as to the result of the escalated...

"accept your mistake" Wow, if you look back in the thread, the SECOND post (stratman ) indicated i should look at "Refillable, larger capacity cartridges. Third party ARC cartridges on Alibaba" No one (YOU) countered that direction, the 20 day later stratman on july 26th stated i should...

I did ,i simply said that they weren't the same and the refill-instructions did not work, i asked for a full refund. They rejected that proposal and said they wanted video evidence of trying to refill the cart> lol, it doesn't accept video so i uploaded still shots of the carts i received...

the picture I posted is the picture the supplier sent me after I inquired about filling instructions. the one i posted with the arrows is the style i received.

Ive run into an issue: According to the direction ive seen i should remove the clear plug, refill and then replace,this includes ( poor) direction by the manufacturer then remove the colored plug. I began to do that when i discovered the "hole" behind the clear plug has no outlet into the tank...

Resolved by Unchecking "reverse pages" original issue: I have been trying to narrow down an issue: I have several PDFs that are about 18 pages long(for wifes hobby)> I want to print them double sided and bind them in a folder.( i want an extra margin on the left hand side of each(front and...

Issue resolved please delete thread

Mine arrived with similar instructions: i do have a question: After the initial refill process and the tank(s) need to be refilled, should the (colored) airhole plugs be placed BACK before the fill plugs are removed to fill the tank?(and then removed again after filling and replacing fill plugs?

OK, thank you > Is there a fill line designated on the catridges themselves or is a speciffic volume i should use?

Link to the thread speciffcially? I had ordered these form alibaba and as i posted in response to the hat, maybe i should order the ones he listed at aliexpress...to be safe. https://www.alibaba.com/product-det...ml?spm=a2700.7724838.2017115.1.2eb77b9dqIJbUd

Sorry for the delay in response, thank you...it seems i may have jumped the gun a bit an ordered through alibaba rather than aliexpress> https://www.alibaba.com/product-detail/BOMA-Refillable-Ink-Cartridge-With-ARC_60555866225.html?spm=a2700.7724838.2017115.1.2eb77b9dqIJbUd im wodmering if i...

yes thank you, i did find a seller on alibaba just before you posted that sold a single set, that was the issue originally. Looking forward to continued use of this unit. Thank you again for all the help and patience.