Search results

Personally never considered the plotter inks, but it is Lucia pigment. You won't fill the complete PRO-1000 ink set, but you probably will need a custom profile if correct colours is a concern. Report your experience !

I suppose you mean Lucia EX inks for large format printers. Although the PRO-1000 uses Lucia PRO - a later development, with probably smaller (resin encapsulated) pigment parts - chances are big the EX overall quality is better than Inktec. I have no problems with these inks in the PRO-10, being...

I've seen @jtoolman 's videos too and appreciate the geniosity of @mikling , but if I had a PRO-1000 I would have come to the same conclusion as @The Hat . The carts are so large that the time between weighing and refilling the carts is large enough. There is no flushing afterwards either as...

My PRO-10 gives a paper jam warning from time to time without any paper stuck. I then insert a heavy A3+ sheet backwards through the rollers. This seems to toggle a switch and the printer makes a lot of noises but it clears the error. No idea where the switch is located.

Be kind to your printer and behave as an unsuspected user ;) . I refill when the (autoreset) chip shows the red cross (by opening the front door as the printer expects you to do - you have all the time, it doesn't retract the printhead after a while as some other printers do) and with GI-56 ink...

I remember you could choose some options about connectivity when installing the printer. Anyway I don't receive those messages. But is is possible the procedure has changed in later models. The convention on this forum is never do upgrades unless you need to. No idea how to stop them. Maybe...

Great trick you found out, @Hat, and glad your printer is OK again.

Maybe B504 is not only a protection against missing ink flow, but scares also people doing unconventional things with cartridges. There are some videos about resetting the printer (a manipulation that looks like entering service mode). https://www.inkhub.com.au/ink/b504-error-canon-maxify-printers

Just thinking but no answer... B504 is raised when the printer does not detect ink flow (with the sensor in the printhead). Strange enough this should not have occurred since there was enough ink (or the sensor should have failed or the magenta channel clogged). The error should clear after...

I didn't permit them nagging me when installing the printer.

Maybe mixing margin settings in the printer driver with those in LR/PS causes this. I never change anything in the printer settings and the margins correspond with what is set in LR (PRO-10, PRO-9500II). I print borderless most of the time and until now was able to clean up the mess in the...

I see. But why not have 2 of them ? Every professional photographer has a backup camera body. A printer takes more room of coarse, but I have both my PRO-10 and PRO-9500II one above the other on a recovered TV table.

Sad you abandoned such a good printer despite resetting the counter is perfectly possible. And even if it failed, what could you loose ? But I understand not everyone has the time for it, or can use this time in a more lucrative way. I was thinking the same many times, I don't blame you ;)

It was announced on Wednesday but it was not delivered in the 2 shops I visited. Didn't go back on Saturday. Thanks for informing I didn't miss anything. I still have 4 boxes "Expertiz" from 2 yrs ago, but since I must have hoarded at least 1500 A4 equivalents (from 10x15 to A3+) of different...

Except you, me and maybe 5 others nobody noticed :D

The border is not mandatory on the sides, in fact it is only to insure stable paper transport at the beginning and the end. PS: you can check the correct functioning of the purge system by spraying distilled water on the pads (with a long needle when the printhead is in the middle position)...

It seems you print borderless. I recently had to clean the ink absorbers of the plate (by spraying distilled water and absorbing with paper towels). There is a printer setting to limit the overspray area, set it to the left to limit ink spell.

PRO-10 inks are difficult to clean. IMO isopropanol doesn't dissolve dried ink. I would try detergent for dishwashing (on the sink, not for the machine).

The PRO-10 is not only better on glossy papers (with good CO) but also on matte and fine art the gamut is better and the blacks deeper than with the PRO-9500(II). Only the nasty 30mm border with fine art settings...

Just passing this as info, no connection with seller https://www.marktplaats.nl/v/audio-tv-en-foto/fotografie-professionele-apparatuur/m1932232961-colormunki-photo