Search results

Now that's what I call weather.

OK, you guys with the air in the CIS. I am guessing that some of the problem might come from storing ink in the refrigerator. Air is more soluble at low temperatures. When the ink warms up again, it gradually releases air. Unfortunately, the release can occur very gradually. Bummer. I...

Absolutely amazing. $60 including shipping and paper. Mine is on order, because, well, you never know when you'll run out of ink. :)

Thank you for posting that. I had looked for it but had given up. I have a post on page 3 of that thread that explains my thinking, which is somewhat different from Mikling's. I think that's closer to what happened here. A solid or viscous deposit somewhere. Purging required. A new...

I think I have some answers, and a new procedure and recommendation. To summarize, in this case the problem was not air in the sponge. (And remember, these were new but expired cartridges.) I purged with ammonia and distilled water using the Freedom method, and by gosh they sure drain now. I...

There are two other cartridges from the same batch, and they have essentially the same weight. I'm trying to drain them right now. The cartridge does drain to a certain extent. I suppose the sponge drains, but the ink chamber does not drain. (EDIT: I can hear liquid in the chamber when I...

The cartridge has not been in the printer yet. I expect the printer to complain but use the cartridge anyway. I bought this with other cartridges to have some spares. It was old enough that I planned to just drain it and refill it before the first use. The bare cartridge weighed 26.63 g new...

This is interesting. I just acquired a new HP564K XL cartridge that expired in January 2015. That's a pigment black, sponge and ink chamber type cartridge, similar to Canon cartridges. It's for an HP Photosmart C309a. It's apparently a new, genuine HP cartridge. I tried to drain it using...

Anyone? Is the deal still on anywhere? Otherwise it costs about $450, and I'm not going to pop for that just to save money.

Late to the party, just back from vacation. The deal at PROCAM seems to be over??? They show the PRO-10 out of stock on line, and there's no place to click and order.

Are you sure? I have very good water too. I think it has mostly to do with pH, but it could vary from time to time. I strongly suggest that you make a careful test. I could easily see the flocculation by mixing a couple of drops and observing with a 10x magnifier.

There's one thing I think I do not recommend: tap water. I have seen recommendations to just put a print head under running tap water, but here's the rub: tap water can cause pigment ink to flocculate. I was experimenting with cleaning fluids, and mixed a drop of black pigment ink with a...

Thanks for looking up all those discussions. I guess you're right that Canon seals them hermetically. I had forgotten that. But that doesn't mean that home users need to seal the vent for storage. If the vent had not been sealed when Turbguy opened the ink port, it wouldn't have leaked, and...

I don't think so. They're never bulging, and they don't go "poof" when I open them. I just use Scotch tape for storage, to minimize evaporation. It won't hold pressure, so you don't need to worry about that, and it comes off easily. Sealing the vent is not critical, in my opinion.

It's fine. Don't forget, it's partly empty.

Beautiful light, Fingers. (Should I call you Ink or Fingers?) I was born in that stuff.

Maybe. As long as it's pristine, says Roy Sletcher. :)

Maybe you can shoot the snow. Or snert. :)

I also noticed some dark streaks in the RGBCMYK row. Some of the streaks go across 3 or 4 columns.

He used C and M instead of PC and PM. I'm not sure what's wrong with GY, but perhaps the wrong ink has been used there as well?? There may be something funny about black too. I don't know what the solid bars are supposed to be.