Search results

I can do a test with the new slightly elevated jig (I am now using a paper/wood jig, so practically flat) and see if there is a difference by scanning with both my older paper/wood jig.

The latest i1Studio and CCStudio versions generates patches with a white or black separation bar unlike the older versions of Colormunki, where all the patches are connected continously, So I think it should be ok if the distance difference is not too large in Z-direction 5 (3 mm ?)

This is the file....

I want to print a scanning jig for my Colormunki and asking if somebody preferably in Belgium or the EU-region willing to print and send it to me. Many thanks.

I think Farbenwerk.de should have a valid solution for your Pro-10: https://www.farbenwerk.com/canon-pro-10s-eng

According to the description it should be RC paper the second version, so like Sihl/Netbit paper. The price seems to be very economical to me and free shipping. The first version gives me a feeling it is cast paper, but report back because I would be interested to buy it too.

Plan B: use the poster board as a frame and wrap the print over the poster board ;)

Despite the good smooth surface that can cope the ink load the poster board was a few mm too thick to be accepted by my Epson SC-P900 and unfortunately causing head strikes (despite setting it to maximum platen gap): Otherwise I could produce nice canvas photo boards that could be directly...

For those interested here is a patch set for profiling printable PVC ID cards that can be printed on by several printers (Canon, Epson) using a special PVC ID card tray. In most cases the standard setting will give a strong colour cast and with this target set (be be printed on the front and...

Ohhh well it begins again: https://bchtechnologies.com/blogs/blog/optimizing-printer-profiles-colormunki-native-software-vs-argyllcms?srsltid=AfmBOorKIUaAN8_a-fTL7lFEdf0SFSfXBHYmaA6Ii7QawP-lfGui4KB_ They keep on extracting data (especially my quotes) on his site without any reference to this...

I also have some LabelOcean 230 gsm paper (Ebay) in A2 format that can be printed well with my Epson SC-P900 and on that printer it does not glob at all. Also cast paper type, so black point is not as good as RC papers, but it does it job. The Action Glossy 210 gsm A4 paper does not work well...

This morning I went to the local Action here and I bought some of this Action paper: A4 in 210 gsm and 10x15 cm in 250 gsm version. I did some tests: my Epson ET-8550 likes both papers, BUT there were indentation on the 210 gsm version (known problem with cast papers on this machine, so use...

How is that Action paper doing: is it RC or Cast based, because you said both the front and back are smooth suggesting it is RC paper

@palombian : Do you also use my miniature profile technique to save paper and ink ?

I have some papers of Label Ocean 230 gsm cast paper and it is not bad with my P900 with pigment ink, but you can noticeable see the lower black level with PK. It however absorbs the ink well.

They have very nice paper and not expensive at this polish webshop: https://www.papierdozdjec.pl/ You can ask for a quote about costs and shipping to Belgium. No cast paper but quality RC papers. Available in different quality options (240-300 gsm), glossy and satin/pearl papers: from A6 tot A2

ProPhoto RGB is a fictional color space that even high camera's are not using: they use either sRGB or AdobeRGB. AdobeRGB is the largest color space most real life pictures are to be displayed in. Even high high screens (Eizo) can hardly disply 100% of the AdobeRGB color range. So my question...

Yes it is: so just forget what you see in print preview. It is the printing that counts. ProPhoto RGB can never be printed, every printer/ink/paper/media setting combination has a much smaller gamut. Color management is just a method to translate the supposedly should-be color towards a smaller...

Print preview is faking you: you can see a strange color cast if you load the profile. But it will print OK. I get this when print preview pops up: This is the picture in PS When I load my profile and start print preview: The print preview gives me a reddish glow on the picture (skin tone...

absolute colorimetric is NOT done: choose relative colorimetric or perceptual content with BPC: on