Recent content by TheBaldEagle

Does anyone have experience de-curling Ilford Galerie Prestige Smooth Pearl roll paper? I'd like to know how flat I can get it; if it can be flattened enough to feed through a Canon Pro-1000 without fear of head strikes. I'd use a 17" wide roll. I would like to cut sheets from the roll as...

It seems that the last several times I've replaced the maintenance cart on the Pro-1000 a system clean has been triggered. I've weighed the empty cart, installed it and let the machine do whatever it's doing ( lots of unexplained noises ). After the printer appears to have settled I've pulled...

I weighed the MBK cart and it does weigh more than the others, 120g instead of 116g.

Thanks for your response. I've had difficulty in the past making contact with Jose. Anyway, I've weighed the carts, both empty and full; the empties weigh 32g to 33g. The full ones weigh 116g, with the exception of MB which weighs 120g. Based on those numbers I think the carts may be a...

Does anyone know the weight ( in g ) of a full PFI-1000 ( for the Pro-1000 ) cart?

I've had the printer a little over a month. First noticed the strange behaviour about a week ago. Firmware version is 2.060. I noticed that all the "registered" media types shown in the Media Configuration Tool would not display on the LCD of the control panel. It's when I selected page size...

Did a print the night before, no problems at all. The next morning B200; alternating white and orange lights X 10. Tried a power reset; no success there. The printhead carriage is parked at the right side of the printer, the ink bay doors will not open, no sounds whatsoever. Aside from the...