Recent content by Sammickk

  1. S

    Help, with pixma pro-100 (print head bad?)

    Attached are two pics. 1.An old nozzle check of when everything was working fine compared to new nozzle check. 2.what color the picture should be (blue Color) vs what its printing now, (pinkish) I have changed ABSOLUTELY NOTHING in my software, setup, or drivers. I do use precision Ink and...
  2. S

    Pixma Proo-100 Color Issues

    OK update time. I got a new round of inks from Precision, except for black, because i recently bought a new black. As I mentioned, I had a new set of 8 carts that I flushed, I ended up putting the new round of inks in the carts I flushed, with the exception of yellow, because of precision's...
  3. S

    Pixma Proo-100 Color Issues

    Actually I'm almost certain a profile is not to blame, because I bought this printer to use specifically with the Redriver paper, I have never changed anything since i first got it and set it up. I print with the same paper always, it's what the printer is used for. Though I will try this anyway...
  4. S

    Pixma Proo-100 Color Issues

    OK I'll start answering all your questions I can, 1)PC 2)San Gabriel SemiGloss Fiber From redriver paper 3)Pro file Provided by red River for the paper 4) not sure I understand, Canned i think? 5)yes did the calibration test Nozzle check came out clean, no smudges or streaking or lines or...
  5. S

    Pixma Proo-100 Color Issues

    OK thanks to everyone I'm back in business!! :bow Greens are correct and I can print again. Embarrassingly, I guess I did mix up the Cyans!! :oops: Now all I have is My original Problem, I still have to Set my "COLOR/MANUAL INTENSITY ADJUSTMENT", under Print preferences, to "Intensity =...
  6. S

    Pixma Proo-100 Color Issues

    Ok well, i think my next move is going to be to grab a new pack of all 8 ink carts and give that a go, since these originals have been used over a year now, it may be time to replace or refresh them anyways. Should i do another print head flush with warm water? Or would just a deep clean nozzle...
  7. S

    Pixma Proo-100 Color Issues

    Thanks for your help guys, to begin to answer some questions, yes I'm sure the ink is in the right color carts, because i thought that I had mixed them myself. I even checked twice because i thought i was going crazy. So i know this is not the issue, i have to go to work I will write more when i...
  8. S

    Pixma Proo-100 Color Issues

    OK, I'm hoping someone out there can help me out of my printer nightmare, here is my story thus far. I bought this printer over a year and a half ago, and once the genuine inks ran out, I switched to precision inks refills, buying the yellow ink cart and relocating the yellow chip, then...
See more
Top