samboy's latest activity

Sorry about that. The link should be working now. Can someone please confirm?

I'll do that now. Please come back and watch it. I kept reducing the size so I could attach it to the thread, but it never would get...

P r o-100 video in case you can't click the above

Did somebody say video? Here it is. I took the top off per hat's advice. Not too sure what more I can see though. How is yours different...

Nobody gets paid to help you so don't take any 'work' for granted. We don't know why that bar spins quickly because we are not looking...

Do you guys just work on business days? Why would that bar spin quickly at the end of a cycle on? The pulleys seem a bit loose and that...

After checking further the screech at the end is that bar underneath the white flaps. It decides to spin superfast for a second or two...

I pulled the cover off and started it up. The printhead never goes more than a third of the way over.

Here is a link to a prior post on the same error code: https://www.printerknowledge.com/threads/canon-pixma-pro-1-error-6010.10606/...

Pull the top cover off and see where the print head is jamming and free it up, it’s not hard to do, so have a go, you’ve nothing to lose..

As I do not own or know anything about this printer, but I do know about repairing broken machines without guidance. Assuming the...

Thank you for the suggestion, but sadly, this did not work.

I would try a total reset first: Turn off the printer but leave it plugged in. Hold the Resume/Cancel button (triangle inside a...

Also, one thing that does happen on occasion is that the back paper feed door detaches on one side. I can push that back into place...

Thanks. Should the printhead move to the center when you open the top cover even when there is an error code? Mine is not doing that...