pharmacist's latest activity

It works thousand times thanks !!!

Many thanks for your efforts....I will give it a try, because I have a particular T ring that internall is only 49 instead of the 51.5...

Just the bottom part reduced to 49mm outside diameter?

I am trying to decrease the base lower (diameter 51.5 mm) into 49 mm with the bolean cut method in Blender, but I have tried several...

I finished tweaking the g-code and got it down to about 17 minutes to read the 728 patches. I was using the CR30 bluetooth interface...

Today I worked on a jig to attach the CR30 spectrophotometer to an old ender 3 clone printer I have. It works pretty well although I...

There is something very strange with the ti1 files: it generates greenish space bars when I choose the -b argument in printtarg (not...

Is it possible to upload the bare patch set with only 729 + 234 Extended grays patches (ti1 file with 963 patches in total) without the...

Ink can differ slightly from batch to batch and colour drifting can happen over time. The reason why you will need to calibrate the...

If the If the scanner is factory-characterized . And the ink is known.

I am a bit puzzled: how can you know the colors scanned with the ET-8550 is the right one if there is no reference to compare to ? I...

https://www.ddisoftware.com/printprism/ This would a revolution when we can generate printer profiles without a reference chart and...

Could you upload the combined and corrected expert plus extended grays ti.1 file too ? Note use D50 and not D65 for conversion !

Just to say the above target is not usable, because it gives reading errors,probably the conversion is not done well: There is...

Thanks for the update. I took some time to use PS to manipulate a bit in order to get a combined Spyderprint 729 patch Expert target...