pharmacist's latest activity

Having some time now I write simple manual how to generate a simple RGB printer profile using ArgyllCMS and the very affordable CR30...

I have made a new A4 target with pseudo-scrambled patches for the CR30 with 300 patches and 21 grey steps. I will upload it later with a...

you will need to force about 5-6 cleaning cycles in order to push out the old ink and prime the tubing and dampers with the new ink...

In another life I was a color consultant. Now I am just a poor amateur photographer whose only working printer is an HP laser :)...

Ok friends,I've been around and around and around about this forever! I'm usually (at a fault) frugal <cheap> and have a hard time...

Maybe I should give it try to use the sRGB color space as the target space when generating my profiles and see what happens in the...

The difference can only be seen with perceptual rendering intent, which makes sense, since according to Argyllcms documentation you only...

softproofing with the sRGB vs AdobeRGB based profiles using the relative colorimetric intent (NO black point compensation): No...

I get this with my makeprofile.bat (using adobeRGB as the reference color space for colprof.exe): No difference in volume size and...

Could you upload the ti3 file so I can have a look at it and regenerate the profile again ?

Actually the best way is to buy (expired) violet ink cartridge from LPF Epson printers and suck the ink out with a large syringe: the...

The Blue one

You see I am a complete noob in programming :oops: Note: the SpyderPrint does supports strip reading, but spot reading is much more...

I thought I pretty much already did here with awk not python. For beneix the bad part about the CR30 is it is a bit tedious reading...

You are right that Datacolor products have been updated over time; I'm not familiar anymore with the latest version of their pakcages...