pharmacist's latest activity
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.There is also a bug in the gui.py (@x64, @micronica ): despite you can give an external icc name, the internal icc name (that is... -
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.with te latest version of ArgyllCMS I get an errorthat the ink limit is set to 290% by standard using colprof after I have done the the...
-
pharmacist reacted to Epatcola's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with
Like.
And a few batch files named paper_sizexpatch_countxpatch_size to generate various targets on one or two sheets. -
pharmacist reacted to Epatcola's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
Yesterday I created an A5 target with 384 randomized 8mm patches. I printed it on half an A4 sheet of Epson Premium Glossy paper on an...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.OK, so for the moment only non-randomized patches will work. This is not a big deal, but when using several grey steps, because the hue...
-
pharmacist reacted to micronica's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
pharmacist Hi Kodak Ultra Photo Gloss, L365 regular, EPSON ink looks fine to me. U can check if im correct from attached files. Thx...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.yes the workflow is ok, but the sublimation ink: most use a special RIP to print the pictures on textile. NOTE: the target must be...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I suggest to try to make profile on normal paper and compare it to an exisiting profile you use for that paper type and see if your...
-
pharmacist replied to the thread A basic guide (see post #1) to setting up ARGYLL CMS profiling on your computer.You might have at try with this target (It might be same you have downloaded I have also included a smaller target that does not need...
-
pharmacist replied to the thread How many of us are still refilling ink cartridges?.You could have save the money for the Calibrite software: it is compatible with the free CCCalibrite or the i1Studio software (older...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Are you printing with a RIP or a standard printer driver: note the target is for RGB printer drivers and RIP programs need CMYK targets...
-
pharmacist replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Hello, I use ----------- test mode (M0) light source angle (D50/2 degrees) L A B 400 nm .....up to 700 nm ------------ Be sure to...
-
pharmacist replied to the thread A basic guide (see post #1) to setting up ARGYLL CMS profiling on your computer.I presume you did execute a nozzle check before printing your target ? If the nozzle check is ok I will try to upload another target for...
-
pharmacist reacted to HungTR's post in the thread A basic guide (see post #1) to setting up ARGYLL CMS profiling on your computer with Like.
i am using the 480 patch from @pharmacist and the xrite i1studio to make profile but when i go and scan chart A this message "Raw Bands...
-
pharmacist replied to the thread A basic guide (see post #1) to setting up ARGYLL CMS profiling on your computer.The scanning must be done very slowly and steady: start/place the scanning eye on a white area before the row (to be scanned) and press...