pharmacist's latest activity

Michael Lee sold his company to an american entity and is now completely USA-based. Beneficial for US customers (tariffs). I only...

Please note this is not a political post but a heads up that if you're in the USA and you order anything from outside the USA you need...

The surface is of the PLA print is indeed slightly rough, so the printer should have a good grip to pull the tray inside the printer and...

I would be tempted to stick a sheet of paper on the bottom of the tray, possibly removing the bottom 0.3mm of the model first. I think...

I cannot increase the design too much, because it must be considered as thick paper. I already increased the thickness slightly and it...

I could fight the problem of the slight slope with free transforming (rotating) the image with -2.2 degrees in order to get the image...

Better now, but still that strange slight angle when printing:

O’ the joys of 3D printing..:ya

Note: the above PVC-ID was already printed with my Canon TS705 printer and is only inserted inside the hole (if somebody thinks it is...

Pfff, not a good idea: the Epson driver makes a hole in the area with the central hole

Sometimes you need to join them instead of beating them:

She is one of the best no-nonsense / to-the-point / consistent-process reviewers out there. ... oh, and on her "top printers" list...

LOL! Believe me... that's definitely something I've said to justify it ;)

I think the rounded corners is not helping too. I will try to change it to rectangular sharp corners.

I'd guess it is something to do with the wheels gripping and feeding the tray at different strenght, or tolerance related where the tray...