pharmacist's latest activity

So actually the TC 2.83 target has no extra benefit compared to the other targets if I have understood it.

I checked already the TC2.83 patch sheet...

Here is another target I have made based on the TC2.83 target that is originally included in the Gretag Macbeth iMatch software...

Thanks to @Ink stained Fingers idea using a very small target (96 patches) on a small 10x15 cm (4x6") paper to obtain a rudimentary but...

I've had some experience with both Bambu Lab and Creality, personally would go with Creality for a cheap learning experience for...

Of all the printers I have bought in the last 8 years, Creality have been for me the best, they make small as well as large printers so...

WARNING : You're about to open a deadly can of worms. Think twice (or thrice ) before entering into the 3Dworld, a land of no return...

Hi @Ink stained Fingers The 10x15 cm target is already up to the maximum I can do (192 patches). The i1iO target can be easily scanned...

Hello everybody, Having alot of experience with 2D printers the last decades, I want to enter the world of 3D printers. Any tips about...

Nice to hear. So according to you most will be more than satisfied with this miniature 192 patch target. That would be very interesting...

Let me mention the DeltaE numbers of the last test - I did in this case compare the patch prints done with the 720 patch profile and the...

aliexpress might be your friend sometimes they deliver within 7 days.

I expect a marginal change for the DeltaE 165 vs. 192 - value only - in the range of reading noise/variations behind the decimal point...

I hope you will report back and see how this target will perform compared to a larger patch size target like 729 or even 2880 patches...

@pharmasist - it works - I printed your 192 patchsheet on a 10x15 cm card and scanned it with the i1io2 robot - it works !!! - that was...