Recent content by Norbert

my problem : how to enter service mode with a printer which is in error ?

What I feared may have happened . Error 5110 also indicates a problem with the operation of th print head support , I checked and there is no paper jam or anything else . My printer is only 3 years old , should I just throw it in the trash ??? is there a solution ? Thanks

hi all , and happy new year when switched on, the printhead goes up and down several times but , apparently , does not find its place and remains free from any movement from right to left on its axis , The orange light flashes 11 times and gives me error 5110 . Can I do something ? Thank you .

hi still on sale ? thank you

I cleaned and refilled my 2 sets of carts and the problem is still there . Could it be a paper feeding problem because there is a darker strip only at the start of printing in B and W or color ?

I don't understand why I have banding only at the start of print and why the grey cart must be the problem , it's the same with color printing

As recommanded by "the hat" , I cleaned the encoder strip and the grey carts , the problem on the last two images disappered , however the dark strip at the start of print is still there ( images 3 and 4 ) . I still have the problem of images 2 but only with this photo !!!!!????

thank you , how to clean the strip ?

Hi all I have a problem that I can't explain other than by descriptive photos . whether i print with PrintFab or with the Canon xps driver the problem is the same . Printer : canon pro10 s ( 2 years old) cartridges : OEM inks : octoinkjet what do you think ? Thank you

yesterday at 9 p.m : flush my yellows cartridges again and refill as Websnail recommended , and since this morning everything is ok , thank all for your help even if some confuse advices and orders :) Merry christmas to everyone

well , yesterday I cleaned the 2 yellow cartridges (OEM carts) , this morning a nozzles check ..........yellow missing , after 2 nozzles check , it's good , but always the same problem

Apart from the method used to access the purge station , I followed your advice , so I don't understand your way of answering me !

yesterday , I removed the right side panel , made a hole on the part above the printhead wich give me direct access to the purge station which I cleaned by flooting it and soaking up the dirty liquid , took out the printhead and cleaned the light ink deposits around the nozzles . Putting this...

cleaning the printhead outside the printer will be useful ?

Nozzles check this morning ........yelow is missing , 3 nozzles check and it's ok . If I perform a nozzles check about every six hours ( after a good nozzles check ) it will be good every time , but if I wait longer ( overnight ) the yellow is missing !!!! there is no smudges on paper surfaces ...