Recent content by lightfj

No problems as I remember. All cartridges are OEM and both fuser unit and transfer unit have been changed for brand new oem units in turn. That's why my thoughts go to a sensor that only functione when colour is selected. Sadly I don't know enough to be able to find one. Could it be that it...

This fault persists, I have changed the transfer unit and the fuser unit and all the artridgesand it still fails. However a mono copy works every time. Are ther any sensors which could cause this? Paper path MUST be clear if a mono copy goes through. What on earth could cause this, please elp if...

again thanks for the reply .. I dont quite get what you mean by hand feeding not under power while not printing. what I dont understand is why when monochrome is selected the copying is perfect. This suggests that the transport path is fine. Every time colour is selected at half page it stops...

Thanks for the reply. I am using an insure &go brochure as a test .. it shows pink flamingos with a band bearing the name at the bottom of the page. copying always stops at the feet of the flamingos, which are perfectly reproduced. all the colours are spot on thus far. This says to me that all...

my konica 1960mf laser jams after half a page in colour. Please note this photocopying so no Computer is being used so it's not windows spooling. It copies the same job in mono perfectly every time. If anyone can help I'll be very grateful thankd Jeff