Recent content by JRImrie

InkjetMaster, The seals area hollow cylinder for the most part and can therefore be pushed on too far. Check and make sure that the hollow part below the seal is not collapsed.

Thanks CanonPhreak for the answer on the 5100 error. I cleand the strip and the carriage bar. I still am having probles withe nozzle check Cyan prints for the B pattern but get nothing under the E pattern. Seems very odd that two new printerheads would do this. Any help would be appreciated. I...

I got the printer to print yellow but still will not print the "E" nozzle check. Tried blowing into vent hole to prime no difference. Eprom printout says error 5100 but there are no lights flashing. Any help would be greatly appreciated.

I have a problem printing yellow and the cyan yellow (E nozzle check). Have installed two printheads new one and a replacement from canon. New cartridges, cleaned contacts, not plugged, no error lights, but it still will not print the yellow and the cyan yellow (E on nozzle check). Canon says it...