I worked up to doing what I did. I would skip the glycerol if you don't have it. It helps keep things wet and slick.
I initially didn't want to use ammonium hydroxide or isopropyl alcohol either, but if it's broken then I wasn't concerned with it getting more broken. I've also used hot...
I fixed the striping I was having using a solution of 88cc distilled water, 2cc of clear ammonia, 4cc of glycerol, and 26cc of isopropyl alcohol. I wedged a 1 in length of 1/4" tube over the ports the cartridges attach to, and rinsed the entry ports without applying any pressure to the internal...
When I purchased the spongeless kit, I went with Canon Megatank Ink (GI-290) for the tri-color. It's not color matched and I didn't do any profiling, but it works well enough for the everyday stuff I do. For black I use ink designed for the HP-61 because I bought too much of it and hated the HP...
Does the Pixma Pro-100 have a vacuum line? I haven't found a service manual or tear down to see what it has. It appears different inks behave differently to ammonia, so I was under the impression that when ammonia loosened everything up that the inks that thinned out more ended up gravity...
I made the ink model numbers link to the US page below:
In the US - T512 is for the ET-7700. Marketing says these are 1.5pL sized print heads. The T502 is for the ET-3750 (current model Workforce) which is 3 - 3.3pL sized print heads. The T664 & T774 are for the ET-16500 (previous model...
Smoking has a lot to do with this, since the article posits that respirable dust and toxic materials that are byproducts of combustion from a 3D printer are harmful to health. Deliberately inhaling smoke, no matter the source, is not good for the lungs but you should acknowledge incidental...
What tools are used when your head cleaning fails? For instance, I sometimes use a T252 set of cartridges filled with piezoflush and gently pressurize the air vent hole with a syringe to flush the solution through, but that's it. I have two WF3640's and one WF3620 in various states of clog. The...
@The Hat @Ink stained Fingers Thanks for the results. I haven't read through all the threads; it's nice to see that the results are consistent. It's a tedious experiment that doesn't get done enough. I did this test last year with all the various printers I have collected with unknown brands and...
I've printed on posterboard, but you have to add the inkjet receptive coating yourself. Look at InkAid or Golden Grounds Digital. If you don't want to try that, Brother specifically has a straight through paper path on a bunch of their laser printers and if you crank to fuser up to super-thick...
So I guess I don’t have a problem that needs fixing, but rather a problem I fixed. Figured success stories and techniques coming from this forum should be mentioned.
About four weeks ago I noticed at the bottom of the cyan block on the test page didn’t have a crisp edge. Since TurboPrint has...
I just ran the updater on an older WF3640 I have (had CB29G7 20.A5, now has CB20GC 20.A5) which I think is current. All my refillable carts still work. The PC refillable carts (as well as 2 other types I've purchased) will produce a nag screen the first time you print (per computer) after...