Recent content by fineartphil

Appreciate your input and I will give it a go for a month or two if necessary.

Have tried this 2 or 3 times with no improvement, perhaps I will give it a go again. One techs I spoke with thinks the head is breaking down as as the piezoelectric signals begin to diminish another suggested the culprit is a head strike which I know is not possible.

After running an (initial fill) with internal cleaning solution and many many cleanings I am still missing the center of my Yellow channel. There also seems to be some overlap on the Yellow channel as well, I have uploaded a jpeg of my most recent nozzle check. I am going under the assumption my...

I cannot thank you enough, much gratitude my friend. Hopefully I can resurrect my 7890, it shows different clogged nozzles each time I run a nozzle check. I also misquoted the cost of cleaning solutions online, at last check a gallon tipped the scales at $500. Quite incredible as it is in line...

Working for da boss both night & day.... rolling....roliing on da river ; )

I am finding a lot of food grade propylene glycol online, is this workable or is there another grade or type I should use???

A thousand thanks for the info, is it safe to assume the isopropanol 99% is ok ?

There are a number of internal cleaning solutions on the market on can fill into empty ink cartridges to clean Epson k3 /Ultrachrome inks. Most of these solutions are priced in the stratosphere commanding $200 dollars or more per gallon. I am hoping someone knows the formula for making their own...