Epatcola's latest activity

What we want is to print the colors as they are in the image. The problem is colors in the image outside the printer's gamut and what...

Profiles provided to colprof only affect saturation and perceptual intents. I don't fully understand the point of providing a profile...

I thought I pretty much already did here with awk not python. For beneix the bad part about the CR30 is it is a bit tedious reading...

You can find hundreds of web references telling you: Or something similar. It isn't specific to inkjet printers. The color mixing...

I had a quick look and saw 60 bytes sent for each button press. I expect those 60 bytes mostly contain 31 spectral measurements. I would...

That would be much more complicated. I envisage a jig like this The CR30 is a loose fit in the jig main part. The collar around the...

I see ConradH asking about CR30 communications on DPReview. I don't participate there. FYI the CR30 USB interface is just a serial...

Perhaps I should start a new thread, but I wanted to put up some test results on my CM30. It's obviously a CM30 by color and function...

A small, but, useful update to the target generators, ti3 generation script, and instructions.

And a few batch files named paper_sizexpatch_countxpatch_size to generate various targets on one or two sheets.

Yesterday I created an A5 target with 384 randomized 8mm patches. I printed it on half an A4 sheet of Epson Premium Glossy paper on an...

I am using 8mm patches and the rule I designed so you only need to see a couple of patch 'joints' to align the rule. I have never had...

Today for the first time I printed and measured a target. The target was randomized and I couldn't generate a profile. I think the...

Something is messed up. I don't know what your .colors file is. I generated an A5 10mm patch target from your 228 ti1 file with this...

I have not tried generating a profile yet. I have an i1studio so I don't really need to. I bought the CR30 because it is cheap and...