Epatcola's latest activity

That is some really nice target. I might 3D print your aligment ruler this weekend and give it a try. However not sure if @x64 already...

The target is straight out of printtarg. No need to edit. All you need is something that can print without color management and to scale...

This targen -v -d2 -g 16 -f 486 test printtarg -r -v -i 22 -p A4 -a 1.2506 -T914.4 test produces 486 x 10mm square patches on an A4...

Here is a collar and 300mm rule for 10mm square patches. Rule and collar on your 247 patch target scaled by forced printing at 518 dpi...

I noticed the calibration cap has a serial number matching that which the device reports to the application. Our white calibration...

With a collar like I suggested and a patch pitch notched rule you would only have to align the rule for each column the CR30 would just...

Thanks both for the work you have done on this device. I had a CR30 delivered today. I think with care you could go smaller than 15mm...

I will already upload my new target that has 247 patches of which 21 grey steps included for those interested. It fills up the whole A4...

The CR10/20/30 are at the bottom of the page I linked. I assume they are the manufacturer or at least closer to them than aliexpress and...

The file says NUMBER_OF_FIELDS = 7 while the DATA_FORMAT statement has 8 fields. 228 * 7/8 = 200 Looks like it just reads data...

I'm sure the posts here will contribute in a small way to information AI bots trawl from the internet and regurgitate so eloquently...

The most likely money grab is tying the hardware device to particular computers (which requires an internet connection to orchestrate)...

I'm not sure what you mean in the last paragraph. OS Updates might break screen calibration with older software. I'm sure I will still...