BIG 3D PRINTER !!! Building a Large Format 3D Printer

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
I've been following this guy's AMAZING build, and it finally came together in the video below.

I don't see any cooling... and I'm curious how this works with such HUGE thick lines of hot plastic that probably take forever to solidify.

 

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
Oh wait... maybe these are side-blowers for cooling:

1655928308157.png
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
I don't see any cooling... and I'm curious how this works with such HUGE thick lines of hot plastic that probably take forever to solidify.
I reckon I’ll stick to injection moulding for any big projects, because divorce is far more expensive that any 3D printer, but it’s still surprising how big you can build things with the smaller 3D printer.. It’s all in your head..

When I was making the top lid on my bees nest I was using a point 5 nozzle and the gap to fill was 40 mm and even then I noticed a little bit of sag in the filament as it crossed the gap, but the top lid was finished 2 mm thick so the sag was eliminated after 1 mm height..
1655976593114.png
 

Latest posts

Top