Latest activity

So here's a project! I'm proposing setting up a Canon IP8700 to run graded grey inks in a dedicated print head for printing monochrome...

hi Hat, we did a full cartridge renewal (not cheap indeed ;) but the bands are still there... Is there a user friendly way to unclog the...

I compared and found only the slightest difference at low values of L*, probably because the noise is slightly better with the 5 passes...

Maybe it is not supported officially but it works, i create several profiles on my Monterey Mac without any issues using Adobe Color...

someone has tried with the latest 1.4.0 version ? it seems it works better with 5 passes (averaging all the passes) and 60 seconds...

To me, it looks like the red ink is too weak in the non-oem ink which will show issues in the blues/purples/oranges too. For a...

Hi everyone, I was looking for information, and I discovered this amazing forum. Looking forward to understanding more about printers...

My sc-p900 prints 1 cm wide bands vertical bands (1 cm) on print on expensive paper. no very visible on plain A4 Did...

Thank you. I should have been more clear in my post. I have already cleared the block and the lines are still full of Piezo Flush. My...

I think the latter. No matter if you use software to flush it, or just print large blocks of specific ink colors, you'll need to refill...

Sorry, I'm three days late with this. I first posted it three days ago on an insect forum.

My Ender3-SE printers were printing at ridiculous speeds when I first got them, and with plenty of help from here got them down to a...

Had some issues with my 3880. Basically 3 channels partially blocked. Did the rag with Windex overnight and that helped but still had...

Ink oversaturation is typically measured using a spectrophotometer by checking the black density and the maximum total CMYK coverage...

Overthinking measurements takes into account different values. One example is the printer target: if the dE in the shadows are...