Search results

  1. M

    Canon PRO-100 or PRO-100s Waste Ink Pads full?

    And the printer model does not appear
  2. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hello, 2 things, 1º The Service Tool St5204, and surely others, they will not work with the change of hardware of how the equipment was when the purchase of the application was made, and between another hardware to the HDS, if they are added or changed. Recovering the original configuration...
  3. M

    Canon Pro10S - error 6700 continues despite new printhead

    Hello, the way i put it on service mode was press and hold the cancel/resume button, then press ON button, led will be white. Whilst holding down ON button, release cancel/resume button and press 5 times,with each press of the cancel button the white and amber leds light up intersperse, leaving...
  4. M

    Canon Pro10S - error 6700 continues despite new printhead

    Hello, a the service tool is the V5204 unlimited use for a PC, it is on ebay. To access the printer is explained in the detailed page: https://www.printerknowledge.com/threads/canon-pro-100-cabinet-removal-procedure.14918/#post-129909
  5. M

    Is it dead - Canon Pixma Pro 10-S, 26 flashes, error 6700

    Good information, thanks.
  6. M

    Is it dead - Canon Pixma Pro 10-S, 26 flashes, error 6700

    Hi palombiam, from an image from the previous post (in which you can see the Wi-Fi module), I am almost sure that it is the same as the Pro 10S, only that in the image the battery and its housing are already disassembled. In my case I have disassembled the Pixma Pro 10S to put a printer potty...
  7. M

    Is it dead - Canon Pixma Pro 10-S, 26 flashes, error 6700

    Hello everyone, following the detailed instructions on this page: https://www.printerknowledge.com/threads/canon-pro-100-cabinet-removal-procedure.14918/#post-129909 The post shows well the hook tabs that have to be pricked with screwdrivers to remove the covers. When separating the upper cover...
  8. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hello The Hat, in this forum I have learned a lot and I hope to continue learning.
  9. M

    Resetting the waste counter to a Pixma Pro 10S.

    Kaixo Artur5, Maybe the Pro10s needs 5 presses to enter service mode and the Pro10 or Pro100 only 4? I don't know, I have not tried any other combination.
  10. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hello palombian, my version looks the same.
  11. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hello, I can only tell you what I do, and I have reset the printer with 5 consecutive keystrokes.
  12. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hello, I've seen the good post from The Hat, but if you could put pictures of the different things from the Pro 10 printer opening, that would be fine.
  13. M

    Resetting the waste counter to a Pixma Pro 10S.

    Hi all. I have reset the waste counter to a Pixma Pro 10S, with little use, with the service tool V5204. The printer is installed via USB and WIFI. I think it is important not to use old versions of the service tool program (because it can block the service mode), and when it opens, perform...
  14. M

    Canon ip8750/ip8760/ip8720/ip8740 ink absorber reset

    I just opened the service tool program and windows defender has reported a virus threat, that is, the day I opened it for the printer, windows defender was not activated. The service tool program was bought in August 2019, the seller does not continue to work and is the ¨Canon ST v 5204 Service...
  15. M

    Canon ip8750/ip8760/ip8720/ip8740 ink absorber reset

    I put the printer in service mode, connected by WiFi and through the 5 presses, with each press of the cancel button the white and amber leds light up interspersed, and lastly the power button but not at the same time. Everything in a slow way. Then connect the usb cable and open Service Tool...
  16. M

    Canon ip8750/ip8760/ip8720/ip8740 ink absorber reset

    Hi all. I have reset the waste counter to a Pixma IP8750 with the service tool V5204.
Top