Search results

Well i just replaced the belt and cleaned the rear front waste toner dumps and still the same problem.

Good way of testing. I didnt think of that way. I was always thinking it was the fuser unit and it would need replacing. But after the test it looks the problem is before the fuser. I am now looking at the drum belt as this is the only thing i havent replaced yet. I can see when i look at the...

I have a Xerox 525 printer that does not print on one part of the page. The hole right side of the page on the edge has a gap in the print about half an inch wide right on the edge of the page where is does not print. I have rebuilt the drum unit and cleaned the printer right out but the line is...

HP do this to stop people using compatible ink cartridges, I have this problem with my customers all the time. This is a common problem. I tell people to remove the software, delete the printer, delete the directory on the hard drive where the software is installed and re install the software...

Im not sure why you guys have to make holes and poke needles in this cartridge for anyway? MP 610 takes 3E black right? you do not need to make holes or stick needles in this cartridge type. This is how i refill them. First get the orange cover they use to cover the bottom of the cartridge, Cut...

You can put dye based ink in pigmented cartridges and you will not cause any problems with the print head, If you do it the other way around and try pigmented ink in a dye based system you will run into problems.

5L-6L cartridges are easy to fill. You do not need to make any holes in the cartridge. Get your cartridge and turn it on it's end. You will see a silver metal pin. Get a small screwdriver and push the pin in. Turn the cartridge up the other end and go the same to that pin. The cartridge will now...

These cartridges are easy to fill you dont need any kits to fill them. I use a syringe which i have done a slight mod to. I just got a 3mm drill and drilled out the hole in the syringe (the part where the needle fits on). Then what you do is get your cartridge and turn it up side down. You will...