Search results

first atempt did fail i did see 2 clots and then i did it again then whas ok.Print nozzle is now clean printed as razor :) Sponge was not clean white after cleaning.

at the moment the magenta flushed card is working ok. Iflushed card whit 12ml windex in and out 20 times.

Are PC inks better in print quality last edition than Octoinks for pro 10s?

i did get problem from oem magenta to octo magenta.

windex 10+ times in and out 12 ml. first time i think i did 4 times in and out that did not help

Sure. now is 6 day no problems whit ink flow from cartridge. I haw 2 OEM magenta carts same problem whit bouth carts. Now they are all 2 cleaned and in use again whit same ink.

warm water and windex.

the oem magenta pgi 72 cart needs to flush out 10 times with cleaning solution.... water only will not help, just to get cleaning solution out. Edit:

[ To haw no problems is must to flush the magenta cart out whit cleaning solution 10 times in and out.Then 2 ml magenta ink to refresh and then dump that ink and fresh refil.This is the best way.

So far after big cleaning and rinsing of the cartridge there are no problems.I learned that if you want to see the right results of Nozzle check you need to do it 2 times in one time.One nozzle check will not show the problem after cleaning or etc. Also before printing will be nice to use app...

Flushing the card whit solution 10 times in and out did actualy help. I did Also create new color profile..It can be faulty becose of magenta ink not working properly. Now i wonder if this will happend again if the ink is the problem...Or is that a reaction betwen OEM and Octo ink..After...

Thx This did actualy work to restore nozzle.As you say did inkjekt cleaning solution 10 times in and out. Then magenta ink 2 ml in good shake and i dispose of that ink.Then fresh refil whit magenta ink. Now i wonder if this will work whit octo pgi 72 magenta ink or it will happen again in time?

so that ink is making us bouth same problems. The problem is also that manny users dont even notice that for a long time. That nozzle check is not ok on magenta.

so which magenta is in that cart?

Ok il get an OEM cart ink magenta and stay on octo or full migrate to USA PC SE inks? Flushing the card helped a bit but not to get to 100% So the cards are caput also for refiling and need to buy a new OEM set?

the banding is magenta problem

i think its the cartridge fault not the ink?

just same behavior magenta by me yes

This goes away whit cleaning cycle but comes back after printing only one photo by me...other 9 inks are ok yes...

i haw 2 sets and it is same whit other. If i leave it a minute to hold the first nozzle is ok again and seccond one again whit missing..so the ink is not comming to print head.I haw taken out the print head and cleaned it whit soft warm water.Put in all.First nozzle ok.Second again the same...