Search results

EEPROM Printing procedures within the same series are compatible. Hence the instruction for 970 should work for you. They are slightly tricky viz a viz type of tray to use etc hence read instruction carefully

HP LASER JET ERROR CODES DEMYSTIFIED http://www.nifty-stuff.com/forum/viewtopic.php?pid=28719#p28719

Hi All, Came across this well compiled list of error codes for HP laser Printers, thought would share it with you all. Rgds Error 02 Printer Warming up * Turn printer off. Unplug I/O cable from rear of printer. Power up printer and see if it goes to ready. If printer goes to ready, the...

rapid4me.com/?q=service+manual+canon+pixma+mp980

RH, Any luck Mate ????

I guess finding ink composition is not as easy as it looks. Even the data sheets are vague and approx in their findings. QD is right that the most imp ink characteristic viscosity would change by adding small additives without major changes in the composition chemistry.

This should help http://damnprinter.com/105/the-five-easy-steps.html

Yup! you're right using a vac to suck the microfine toner particles is not only messy but I found that the toner particles get into all the unlikely places rendering the vac unfit for other tasks. I personally prefer to blow the toner outdoors and have a polythene enclosure to collect and...

Both Models work with Xp & Vista C4795 uses HP60 cartridges which can be found in two flavours the 60 normal and 60XL (twice as much) The printer uses the dual ink drop method 1.4pl& 4pl It uses the Black pigment ink and the color dye ink. Refilling is easy and works using the easily avl...

If Printing the EEprom is what you wan't Try this while you are in service mode Press resume twice than power Hope this helps

Embguy, Nice job man,that resolution was fast and TY for sharing the refill part. Edit: During refill of a laser toner I find lot of old toner sticking on to the Mag Roller. This I normally remove by blowing air on to it. This way all the traces of the old toner are removed and results in a much...

Prints that have spotting/fading/splotches and visibly faded lines guess have sufferred permanent damage and cannot be practically restored. You need to use tissue paper which is unbuffered in between prints.Non-buffered papers are best with albumen, cyanotype, dye transfer, and chromogenic...

This really is a head-cracker of a problem and beats me hands down. If the file prints ok when printed right away Than the printer should be assumed to be OK. The ink is also OK. Now with the same file, the same printer, the same ink, the same settings when printed after some time appears...

Pharmacist my dear Friend, Sure appreciate your reply, I am a staunch believer that :- The learning curve should never stop. Knoweldge increases when you share and tips sent by experienced people like you would surely benefit all of us. The very idea is to coerce more learned people like...

We would need you to upload two sets 1. That which is Ok as per you when printed straight thru. 2. The one that is faded (when printed after some time)

Embguy do me a favour and create the link,this is going to be one long interesting thread and I am sure with the enthusiastic support of everybody will be immensely beneficial to a lot of people out there. Re. refilling toners without drilling a hole as asked for, in many of the diy kits would...

I use/worked on the following HP Laser printers LJ 2100 LJ 4100 LJ 1007 LJ 5100 A3 canon LBP 2900 LJ 1010 Can others also come forward and document the printers that they own/use We could than pick up the most common printers in use and take up refilling procedures/problem solving from there...

Can you please upload one file, the same can be tested on another printer and we might get a direction to move on, Rgds, Jasii

Pharmacist Would love to read the refill guide. Rgds, Jasii

All i am trying to convey is: A quality printout is dependent on: Quality of Ink Quality of Empty Quality of refill process In this case no 1 & 3 should be OK so that leaves ??????? Rgds, Jasii