Recent content by Xalky

Here's a little tutorial that shows how to set up your printer for cd printing but there's also the procedure for entering the Service mode.http://damnprinter.com/137/canon-mp500-mp800-mp830-mp950-and-ip6600.html

This sound s like an air problem. Either the cartridge vent is not allowing air in, or the seal between the cartridge and print head is allowing air in. The latter is usually caused by lack of air (a vacuum) in the cartridge, but sometimes can be caused buy debris on the seal or a burr on the...

golferdc; What you need is the parts catalog, which shows assembly blow-up drawings and order of assembly. the Parts Catalog is available at the above link for 6.99 and it's an electronic PDF that gets downloaded as soon as you pay for it.Most of the outer case just looks like it clips together...

After some research I did find a place that sells repair /parts manuals for what seems like most printers. Here's the link for the one I boughthttp://www.2manuals.com/advanced_search_result.php?keywords=pro9000&x=9&y=12. I let you know if theres any dissassembly instructions. I haven't had much...

I'd be very interested in this too! If anyone has a how-to with photos or an assembly drawing or procedure that would be awesome.

Just get something that uses the cli8 cartridges that you're used to refilling. It should say on the box which cartridge they require. I don't have any specific recommendations since my ip6700 just bit the dust this week and I have a pro 9000 that's been collecting dust for a year that I just...

If a compatible produces no error then the answer is, you have a bad cartridge. the vent hole could be clogged. Sometimes the sponge in the cartridge outlet is pushed into the cartridge which prevents it from making contact with the screen on the print head. I've had limited success by pulling...

Try this place for CIS and pigment inks. http://kyson.yangportal.com/I've purchased a couple of CIS systems for my canons from them and they sell the pigment based ink for these systems. I've never personally tried the pigment inks in my canons for fear of ruining the print head. If you do a...

I just ordered the blue OM model from ebay, about $27 w/ship. It looks the same as the RKS home version. I'll let you guys know how it works. Bought it from Michele (mapsy)on ebay. I hope it resets the green/ red cartridges from my pro9000.

I can tell you that I already have more pages logged on this printhead than I did on the previous printhead which was killed by refilling. So far this thing is great. Not to mention the 30 or 40 refills I would have performed in that amount of time. Plus I've not once had a clogged print head or...

I was just about to post a thread on how well my new CIS is working and poo-poo the naysayers. I decided to update this one instead. I had to spend the money to find out for myself. The best $75 I've ever spent...PERIOD I have this one set up on my ip6700d...

I was just about to post a thread on how well my new CIS is working and poo-poo the naysayers. I had to spend the money to find out for myself. The best $75 I've ever spent...PERIOD I have this one set up on my ip6700d. http://www.kyson.yangportal.com/Canon%20IP6600%20K.htm It's friggin awesome...

I use Miklings method of refilling the cli-8 carts. However I've found that the second hole on top closest to the ink tank is not neccessary. First, I cap the outlet port with a cover and elastic band, then remove the screw on the tank section. When I refill I inject the ink thru the rear hole...

You might be better off going to a print shop and running them off there. It'll probably be cheaper too.

Mikling would be the right one to ask, but I think the answer is no.