x64's latest activity

In my opinion and experience Brother is THE best manufacturer in terms of price, support and features for office applications. I haven't...

I recently acquired an Ecotank 8550 and I am going to test out the viability of using Epson pigment inks. I already purchased the...

Good luck, I'm interested in your results. As a note for your experiments, the various inks Epson produces differ 'somewhat' in...

For the sake of crossing potential causes off the list, and I didn't read you mentioned it, are you certain it is not caused by...

If you are curious if a printer is supported on linux/gutenprint you can find out on openprinting.org. The HL-L2460DW is not on the...

I am not sure what the term emulsion has to do with ink. Dye ink is still a true solution, not an emulsion. An emulsion is a disperse...

Coincidentally yesterday I stumbled upon an article that may be of some help for you. The process involves printing with a dye ink and...

Thank you for the correction, in my last job I worked with emulsions only, I am guilty once again of calling all liquid mixture...

After some further research into ink emulsion I've gotten to the conclusion it is most likely caused by the aftermarket ink that I'm...

I got curious and tried it too on the Epson Stylus 2100, as it has a handle to adjust the platen gap manually. It barely fits through...

:caf

Another simple way to view this effect is to illuminate with a incandescent light bulb, which typically have a wider colour spectrum...

I'd assume it cycles and moves the printheads to a 'turned off' position/mode in relation to the waste suction cups, rather than the...

Printer manufacturers put in as many of those cycles as they can get away with. They have a purpose, but the more ink the printer...

I'm not sure what kind of linear encoder strips (Canon) printers use, but I'm almost certain they are of the incremental kind. They...