x64's latest activity
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I would recommend just trying it, remember the last block where you had both random order AND empty values, we assumed it was the random... -
x64 replied to the thread Epson SC P900 what is going on.OK, that view will make solving the hardware problem with your P900, confirmed by the firmware nozzle check print very difficult for you.
-
x64 replied to the thread Epson SC P900 what is going on.It is pointless and wasteful to continue diagnosing with software printing long as your FIRMWARE printing has obvious problems. The...
-
x64 replied to the thread Epson SC P900 what is going on.Looking at your nozzle check you definitely have a hardware problem. Yellow has some issues, no vivid magenta coming through, and...
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Nice, that looks pretty good, If you fork from the main repo and push a PR I'll take a look and release it. If you are interested in...
-
x64 reacted to micronica's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with
Like.
Working on easy GUI for script. Dont need to change ini config file and we can set parm for colorprof. -
x64 reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
@x64 : You were right the randomisation was the cause of the hanging of the colprof process. I now have changed the patch layout to be...
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I'm not sure if the random order is causing it, because with our interpretation it is not 'random' (e.g. index 1 on ti2 = index 1 on csv...
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Comparing that ti2 and csv to the files we used to design the converter I notice some obvious problems/differences: -You used random...
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.Something with the gamut mapping the source ICC, when running colorprof with no mapping (no -S/-s) I can create an ICC with that dataset...
-
x64 reacted to Ink stained Fingers's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
This CR30 appears to be quite an interesting spectro; is there any calibration mode - or a reference tile as with the XRite spectros ...
-
x64 reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
Today I was able to do 3 different combinations with 2 printers and 2 types of papers: Epson SC-P900 with Calumet Matte 230 gsm photo...
-
x64 replied to the thread New member.Hi Mohamed, I found a procedure for you to try on the HP support forums that solves a similar problem on different HP printers. However...
-
x64 reacted to pharmacist's post in the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file with Like.
Many thanks 🙏👍 @x64 : the only thing is the cr30_to_ti3.py does not function well but the build_profile.py immediately gave me the ti3...
-
x64 replied to the thread Possibility to convert csv-file with only L*A*B* values into a ArgyllCMS ti3 file.I just finalized 0.2.1 with a lot of improvements and simplification. The workflow and output remains the same but will not decide...