W. Fisher's latest activity

I run three printers that are maybe 30 feet away from the computer via long USB cable. I had to add a USB power booster hub that plugs...

Aliexpress.com was where I got my Epson parts from. I didn't need a service software or found it then, but I did get some initial error...

Still here. Both my 3880's are still running well ( 6 years later since this post began, and maybe now 12-13 years old and still both...

Windows 11 sucks for professional printing so keep your Windows 10 around for any serious color printing. X-rite is still stumped and...

Welcome and have fun with the 8550. I'd like to have one but I got six printers now, but when one of them dies.... I think Epson made...

If you went through the amount of time I've spent tackling this issue, you might understand all the possibilities that may be involved...

Yes, I started with the Epson Windows 11 drivers, but a lot of their selections included a lot of networks things and some printer...

OMG! Thanks for that John! Guess I finally got to the end about using Windows 10 and not using Windows 11 for profile making. Least I...

Dragged the old Windows 10 laptop out and made a few profiles with it. Better success. I did notice that the ccStudio software in...

BPE hs been on for most of the time, and it is checked to being on in QImage Ultimate. I don't recall the BPE being used in ccStudio...

FYI, Keith Cooper just released a video on buying used printers.

This is maddening! No matter what I do the thing prints dark. Tried to print with Capture One and the print was dark and lacked color...

There is a plastic block that holds all the tubes that feed into the top of the print head held on by a few screws. That might be...

I had one bad nozzle plug years ago on a 3880. I took a syringe and hose and pressure pumped some print head cleaner into the connector...

Thanks for that info. I tried it today. I found that doing it either with the "Let application manage color" or it being turned to OFF...