Recent content by turbguy

  1. turbguy

    Picture Of The Week (POW) Information and Submissions

    Nope. I guess it's from the aperture blades (f16 on a 6.5mm fisheye is a really small hole).
  2. turbguy

    Picture Of The Week (POW) Information and Submissions

    Tonight's Laramie Valley sunset, a step off my patio...
  3. turbguy

    Recommendation Needed: Reliability of Newer Generation Printhead

    Actually, another common "fail to eject ink" cause for piezo print heads is air-binding in the ink chamber just behind the nozzle opening. Air ain't as nearly as incompressible as ink. The "drain-line squeezer" is a peristaltic pump. Yes, the maximum vacuum generated is quite low, determined...
  4. turbguy

    A possible reason for air bubbles

    On deaeration: https://watertreatmentbasics.com/how-does-deaerator-work/
  5. turbguy

    A possible reason for air bubbles

    ...or you can degas the ink before refilling by heating it slightly below the boiling point and cooling it before refilling (not recommended without testing, first).
  6. turbguy

    Picture Of The Week (POW) Information and Submissions

    Not much "action", so here's one to consider taken from my driveway.
  7. turbguy

    Picture Of The Week (POW) Information and Submissions

    Thanks for the honor! This added image below was taken with a 6.5mm fish-eye lens on a DX (APC) sized camera, wide open (f3.5). It's performance is quite remarkable. This scene, taken in one shot (no stitching), covers about a 165+ degree horizontal field of view. Just to add a little more...
  8. turbguy

    Picture Of The Week (POW) Information and Submissions

    It's been quite a while since I've visited. Here it is. My best pal, Darcy crossed the Rainbow Bridge a month ago. May she rest in peace.
  9. turbguy

    Picture Of The Week (POW) Information and Submissions

    It has been known to snow here EVERY month of the year!
  10. turbguy

    An arduous task, MP730 Ink Absorbers Nearly Full.

    Whew! Finally got the alarm "Ink Tank Nearly Full" alarm after many years. Disassembled the printer (actually not too hard). Found the purge unit submerged in black paste and wiped most of it off. Only about 1/2 the "diapers" absorbed anything! Removed the old diapers, cleaned the base...
  11. turbguy

    Canon G7020 Not printing black

    Does your printer have seperate waste pads for Black Ink and Color Ink in the parking position? You might have a purge system problem.
  12. turbguy

    Picture Of The Week (POW) Information and Submissions

    A recent sunset from my home outside Laramie, WY.
  13. turbguy

    Unable To Print

    Can your printer print other files (images, word processing files, web pages, etc.) successfully? Do other PDF files openned in Adobe Reader print successfully, or is it just one file that is problematic? If so, more than likely, you are experiencing a software issue rather than a printer...
Top